Dear sipXecs Users, Experts and Developers,
Well, after a couple rough weeks of getting my sipXecs (Build
4.0.0-015321) Server configured, I think I've gotten the core essentials
working well enough to do some real testing.
Currently, I am able make and receive calls to/from every outside
number that I have tried (PSTN Local, Long Distance, Toll Free, Cellular,
etc.), so I'm happy about that. However, in order to make a successful
local call, I have to dial it as if it was long distance. For example - a
local call for us is any number that begins with the Area Code of 757.
Since my DID also begins with 757 I would think that I could pick a phone,
dial seven (7) digits and my call would be connected. Not the case.
Instead the phone (Cisco 7960) sometimes says "Proceeding (in 100)" followed
by dead air indefinitely or after a few seconds simply says "Reorder"
followed by a fast busy signal (this is what usually happens).
My current Dial Rule for Local dialing is setup in a default manner
except the check box for "Treat PSTN prefix as optional" and "Treat long
distance prefix as optional" are both checked. I've tried toggling these
check boxes both ways, but it doesn't seem to have any effect on seven digit
dialing.
So which is it? Do I have something configured incorrectly, or is this an
ITSP issue (VoicePulse)?
Thanks in advance,
Andreas
Systems Engineer
Around the Clock Information Systems
_______________________________________________
sipx-users mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
