On Mon, Jun 8, 2009 at 9:30 AM, [email protected]<[email protected]> wrote: > hi, > > is there some good tutorial where is explained step by step how to > configure sipx 4.0 to handle incoming calls? > > I tested outgoing calls and everything seems to be ok, but i have not > tested incoming calls. Can you give me some link or explain me step by > step where to go and how to configure sipx for this? > > Sipx version: 4.0.0-015321, Centos 5 > > Thanks in advanced!
If you are sending calls to a real user ( say a DID assigned to an acutal user), leave the inbound calls destination blank on sipxbridge configuration screen and assign an alias for that user with the DID. If you are sending calls to a pseudo user ( say a hunt group or conference extension ) or just want to test, it might be more convenient to use the "inbound calls destination" field in the sipxbridge configuration screen so you don't have to define a pseudo-user and assign a did alias, voice mail pin etc. for a user that does not actually exist. Ranga. > > _______________________________________________ > sipx-users mailing list [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > sipXecs IP PBX -- http://www.sipfoundry.org/ > -- M. Ranganathan _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
