We've got 3 testing trunks with Covista. I had them on an asterisk box before, using...
Outgoing Settings: type=friend insecure=very host=xxx.xxx.xxx.xxx dtmfmode=rfc2833 disallow=all context=from-pstn allow=ulaw Incoming Settings: type=friend nat=yes insecure=very context=from-pstn There was no username/password authentication required. I'm trying to move those three trunks over to sipXecs, but it's giving them a 407 (Proxy Auth Required) response. I asked them if they had a DNS SRV mechanism in place and the response was: "We are using a peering realm setup. We do not authenticate anything further than that. Basically, your side needs to be set up to accept the DID traffic as we send it." Can someone explain to me what a peering realm is and how to tell sipXecs to accept the communications from their servers? Thanks, Matt
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
