That's not how I'd go about it...
I'd setup the Call Manager box as a gateway on the sipX box and then make a dial plan that looks for the extensions on the Call Manager box and routes them out that gateway. Mike From: [email protected] [mailto:[email protected]] On Behalf Of Emery ville Sent: Tuesday, June 30, 2009 9:26 PM To: [email protected] Subject: [sipx-users] How to integrate SIPX 4.0 with Call manager 5.0 Hello friends, I am having trouble integrating SIPX 4.0 with Call manager 5.0 I established a sip trunk between both but the sip trunk never is up, I am actually not sure if the sip trunk is up. I cannot make any calls between the servers. what I did : Logged in to Https as superadmin and did the following: 1) I hit the tab System==>servers==>sipxecs_server==> and then in the configure options of left side menu I checked the SIP truinking option. 2) Devices==> SBC==> created internal sbc. 3) Then the Devices tab on top Devices==>Gateways==> right side drop down menu ==>sip trunk==> configuration : name XXX ip ; address : ip add of call manager, route: sipxbridge-1 ITSP account : ITSP server domain name : 10.x.x.194 (call manager ip address) username : XXX password : XXX 4) system==> dialplans==>Dial rule ==> checked enabled at the bottom of the page the gateway restarted all that is required. I see that the sip is working good when I hit the tab System==>servers==>sipxecs_server==> and services. Please help me, I thank you in advance. Thanks, Emery Checked by AVG - www.avg.com Version: 8.5.374 / Virus Database: 270.13.1/2211 - Release Date: 06/30/09 11:37:00
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
