This issue is still unresolved. The behavior previously noted
occurred again after the updated version of sipXbridge.jar was used,
sorry for the confusion. Please see bug report here:
http://track.sipfoundry.org/browse/XX-6073
Thanks, Brent
On Jul 3, 2009, at 2:35 AM, Nikolay Kondratyev wrote:
Can anybody please clarify if this fix will be included in 4.0.2?
Thanks in advance,
Nikolay.
-----Original Message-----
From: [email protected] [mailto:sipx-users-
[email protected]] On Behalf Of Backup Admin
Sent: Thursday, July 02, 2009 9:19 PM
To: Dale Worley
Cc: [email protected]
Subject: Re: [sipx-users] sipx 4.0.1 broken MOH and transfers on
outboundcalls
Issue fixed in svn version 015877. Special thanks to Ranga for
sending the updated version of sipXbridge.jar that resolved this
issue
for me. I am told this version will make it into the RPM's soon.
Thanks, Brent
On Jul 2, 2009, at 9:57 AM, Dale Worley wrote:
On Thu, 2009-07-02 at 01:54 -0500, Backup Admin wrote:
When I dial inbound to my sipx 4.0.1 box via a SIP trunk, my
polycom
501 can transfer calls and hold with MOH, but when I call outbound
via
the same SIP trunk, transfers and hold with MOH drop the calls.
Both
sipx and phones are behind the same NAT. Any ideas would be much
appreciated. ,Brent
We will need a clear description of a failed call and a snapshot.
Dale
_______________________________________________
sipx-users mailing list [email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/
_______________________________________________
sipx-users mailing list [email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/
