Did you make sure you did tests for all DNS names / SIP Domains  from
both PBX's?

 

http://sipx-wiki.calivia.com/index.php/HowTo_Configure_DHCP_and_DNS_Serv
ers

 

 

 

From: [email protected]
[mailto:[email protected]] On Behalf Of naga raju
Sent: Thursday, July 30, 2009 2:00 AM
To: Scott Lawrence
Cc: [email protected]
Subject: Re: [sipx-users] SIP Trunking between two local SIPX servers

 

Hi all,
 just now i tried the procedure
http://sipx-wiki.calivia.com/index.php/HowTo_interconnect_two_sipX_PBXs
in the wiki. i configured dial plan as site to site and i used prefix as
5 in one server 2 in other server. After that i configured a unmanged
gateway by giving addre of opsite server.
like : server 1: ippbx.ippbxserver.com user in server 1 is 200
        server 2: sipx.sipxserver.com and user in server 2 is 500
i am given unmanaged gateway address in server one as
sipx.sipxserver.com and in server 2 unmanged gateway address as
ippbx.ippbxserver.com . both diled rule and prefix given 2 and 5. after
this configuration i called from server 1 phone to 500 but it is given
response as call faild. i tried by using 5500 then also it is not
establishing the call. let me know the problam?

On Wed, Jul 29, 2009 at 8:30 PM, Scott Lawrence
<[email protected]> wrote:

On Thu, 2009-07-30 at 05:19 +0530, naga raju wrote:
> Hi all,
> i  installed two sipx servers in two lans. now iinterconnected two
> lans using a routers. i tried to test the SIP trunking between two
> systems.i followed the
> http://sipx-wiki.calivia.com/index.php/How_to_configure_SIP_Trunks and
>
http://sipx-wiki.calivia.com/index.php/SipXbridge_Overview_and_Configura
tion  for configuration. But i am unable to call between client phone in
one server to other. I  configured sip turnk gate way address of first
server as second servers FQHN and i did't filled ITSP settings because i
am does't connecting to the internet. please give me a idea am doing
right way?

You don't need sipXbridge or a SIP Trunk for this.  See:

http://sipx-wiki.calivia.com/index.php/HowTo_interconnect_two_sipX_PBXs

We use the term 'SIP Trunk' to refer primarily to a connection to an
Internet Telephony Service Provider; connections between two PBXs are
much simpler to set up.



 

_______________________________________________
sipx-users mailing list [email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/

Reply via email to