On Thu, Aug 6, 2009 at 8:17 PM, Jonathan Petersen<[email protected]> wrote: > Todd, > > > > I appreciate your response, and so quickly too. ;) > > > > I have successfully configured x-lite to work with the providers… all of > them actually… albeit I cannot test call transfers (maybe I should kick for > the full version). > > > > I have followed explicitly, over and over again… for a week or more pretty > much non stop (changed firewalls, reinstalled, checked dns, etc)… the SIP > Trunking wiki page… not to mention scouring the internet for information, > engaging various people on the list (Thanks Ranga, Tony and others) > http://list.sipfoundry.org/archive/sipx-users/msg15966.html > > > > I see Voxitas is on the list but callcentric is too. Here is what their > support has to say about it. > > > > “We have reviewed our logs, and from our side, while we are seeing outgoing > calls place under your account; it seems that the calls are failing due to a > Network Failure. Are you using your Sipx behind a NAT? We have had trouble > with this particular IP PBX, when used behind a NAT however on a public IP > it seems to be more reliable.” > > > > I’ll admit that Voxitas is the provider that I have spent the least amount > of time with… but believe me that is a decent amount of time… perhaps I am > really dense… perhaps I am missing something really obvious… perhaps I > cannot figure out how to transfer the settings that work in x-lite into the > sipx configuration??? But something is definitely not clicking and after > all the time I’ve invested I’m starting to think I’m crazy… I’d be happy > to rebuild the entire test network up from scratch, provide all of the > configs, whatever it takes; but there has to be some very low level detail > that is screwing with me here??? > > > > Thanks, > > > > Jonathan > > > > Ontra LLC > > www.ontraonline.com >
Not much can be concluded without a sipx-snapshot. Try the outbound call and send me a sipx-snapshot after making the settings in the "problem reporting" section of the "overview and configuration" Wiki page. I hope you applied the patch pointed to from that page. My _suspicion_ would be that you are bypassing sipxbridge altogether when making the outbound call ; however, I cannot be sure until you send me a trace with the oubound call that gives you trouble. Regards Ranga > ________________________________ _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
