http://www.cisco.com/en/US/docs/ios/voice/command/reference/vr_book.html

On Thu, Aug 13, 2009 at 8:39 AM, [email protected]<[email protected]> wrote:
> Does the 2800 allow for routing calls? Since I can't find a gateway that can 
> route a call based on incoming voice or fax, I'll have to use two DIDs.
> I need the unit to route an incoming call to one of two devices based on the 
> DID, to sipx and to a fax server.
>
> Mike
>
>
>
> On Tue, 11 Aug 2009 17:39:19 -0700, Max Clark wrote:
>> I've been happy with c2800nm-ipvoicek9-mz.124-25a.bin Honestly after
>>
>> struggling with the 5350 (again for REFER support) the 2800 dropped
>> right in and just worked. Haven't touched it since.
>>
>> On Tue, Aug 11, 2009 at 10:53 AM, [email protected]<[email protected]>
>> wrote:
>>> On Tue, 11 Aug 2009 10:20:04 -0700, Max Clark wrote:
>>>> We just moved from the 5350 over to the 2800 ISR platform. The 5350
>>>> would not support call transfers/MOH properly with sipx.
>>>>
>>> Do you think this might have been IOS related over platform? Also, which
>>> ISO do you recommend on the 2800 if that's what I were to look at? I was
>>> thinking of buying an AS5350 because I see them loaded for under $1000.00
>>> used of course.
>>>
>>> Mike
>>>
>>> _______________________________________________
>>> sipx-users mailing list [email protected]
>>> List Archive: http://list.sipfoundry.org/archive/sipx-users
>>> Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
>>> sipXecs IP PBX -- http://www.sipfoundry.org/
>
>
> _______________________________________________
> sipx-users mailing list [email protected]
> List Archive: http://list.sipfoundry.org/archive/sipx-users
> Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
> sipXecs IP PBX -- http://www.sipfoundry.org/
>
_______________________________________________
sipx-users mailing list [email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/

Reply via email to