In my schema i use pfSense on the remote offices, and a Checkpoint R65 on the
central site.
The remote oficces are linked via VPN site to site, to the central site (where
the sipx is).
The external calls are received on the central sipx where the sipxbridge is
working with the registrar service and the media relay.
External workers connects to the central site using an external domain name
configured to refer to the sipxbridge external NAT.
There are about 50 users.
P Antes de imprimir este correo, preguntate si realmente es necesario
Date: Thu, 13 Aug 2009 16:53:59 -0400
From: [email protected]
To: [email protected]
CC: [email protected]
Subject: Re: [sipx-users] Call For Examples of firewalls that work for
bothlocal and remote users...
jonathan and carlos: how many users are you guys supporting with the pfsense
setups?
On Thu, Aug 13, 2009 at 1:42 PM, Jonathan Petersen
<[email protected]> wrote:
I am using pfSense with sipXbridge and it works great! The only “special”
thing that was required was enabling manual outbound NAT which I blurbed about
on this list 8/6.
“The solution in pfsense is here: http://doc.pfsense.org/index.php/Static_Port.
Basically you configure manual outbound NAT and specify the static port option.”
On the remote worker side I have tested both m0n0wall and pfSense which work
great.
Jonathan
Ontra LLC
www.ontraonline.com
From: [email protected]
[mailto:[email protected]] On Behalf Of Tony Graziano
Sent: Thursday, August 13, 2009 9:45 AM
To: [email protected]
Subject: [sipx-users] Call For Examples of firewalls that work for bothlocal
and remote users...
I hear Vyatta, pfSense, etc. I see issues with Netgear not allowing you to turn
off SPI which breaks remote workers.
Can we agree to provide some examples of firewalls that work with sipxecs and
sipxbridge in one or two modes? Local (where sipxecs is installed) and remote
(preferably where you have a remote worker or several and not the need for a
full fledged firewall), obviously if this is a full branch office, a "local"
firewall clone would be acceptable.
I've not had "good luck" at all in using sipxbridge, probably due to firewall
compatibility or settings. So I'd like to hear what others are doing at this
point to counter this.
It would be good to compile this and place it on the wiki, of course, once it
is discussed.
Thanks,
Tony
_______________________________________________
sipx-users mailing list [email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/
_________________________________________________________________
Toda la información meteorológica. Consulta en MSN el tiempo que va a hacer en
cualquier lugar de España o del Mundo.
http://eltiempo.es.msn.com/
_______________________________________________
sipx-users mailing list [email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/
