I configured it in SipXecs by sending the profile. I only used the phones interface to confim that the new data loaded correctly.
-----Original Message----- From: Keith Gearty [mailto:[email protected]] Sent: Monday, August 17, 2009 2:15 PM To: Dennis Wallen Cc: [email protected] Subject: Re: [sipx-users] Number must not be larger than 2147483647 Dennis Wallen wrote: >I have a Snom 320 and just configured function key P1 as you described >below (12 digits total). After the phone rebooted I checked the phones >web interface and the speed dial was there as expected. I don't that >this helps other than to know that it should work. Let me know if I >can provide any more info. > >Dennis > When you say you configured it and it worked, are you talking about configuring it in SipXecs? Or on the phone's web interface? I'm sure it would work from the phone's web interface, but if I'm using auto-provisioning then the next time I send the profile it would over-write the speed dial settings (I think). _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
