Is the same brand that we use, Linksys SRW224P but I think that is not the
problem. When we use SIPxecs 3.10.2 and Firmware 2.2.2 and BootROM 3.2.3B the
error is not present.
Bernardo
----- "Michael Picher" <[email protected]> wrote:
|
|
Cuneyt has a similar problem over in Singapore (I think that’s where he’s
from). He’s using Linksys PoE network switches.
What are you using for network equipment?
Mike
|
From: [email protected]
[mailto:[email protected]] On Behalf Of Bernardo Ortega
| Sent: Saturday, September 12, 2009 9:53 AM
| To: Tony Graziano
| Cc: [email protected]
| Subject: Re: [sipx-users] sipxecs 4.0.2 and polycom 320/330
Thanks for response, but we continue with phone freeze after change to firmware
3.1.3C and bootrom 4.1, buy now we are reseting the phone by hands.
|
| Thanks,
| ----- "Tony Graziano" <[email protected]> wrote:
| | I would try bootrom 4.1 with firmware 3.1.3C.
| |
| |
http://downloads.polycom.com/voice/voip/relnotes/spip_ssip_3_1_3RevC_relnotes.pdf
| |
| | See page 5.
| | -----Original Message-----
| | From: Bernardo Ortega <[email protected]>
| | To: SIPxecs Support <[email protected]>
| |
| | Sent: 9/11/2009 9:18:32 PM
| | Subject: [sipx-users] sipxecs 4.0.2 and polycom 320/330
| |
| | I have the following scenario:
| |
| | • Server: SIPxecs 4.0.1
| | • Phone : Polycom 301/320/330 PoE
| | • Firmware: 3.1.0C
| | • BootROM: 4.1.0
| |
| | The problem is this:
| |
| |
| | • When the phone is time wins record, is seeking a new central register but
fails and freeze, then has to be restarted by hand to get back to work, I
changed my firmware but the error persists.
| |
| |
| |
| |
_______________________________________________
sipx-users mailing list [email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/
