Hi

If you are able to receive inbound calls on your auto attendant but are not
getting any media path when you transfer, you probably have a bad NAT
configuration. FreeSwitch will only relay to ports from where it receives
media and bandwidth.com will only send to ports that are advertised in your
SDP. This means that an inside port must correspond one to one with an
outside port or this ITSP will not work.

( Note that this is not universally true for all ITSPs )

Please read the notes about the subject on the configuration wiki page.

Thanks


On Mon, Nov 2, 2009 at 11:20 AM, jermaine pinder <[email protected]>wrote:

>  Hi,
>
> I installed version 4.02 with and EdgeMarc 4500 unit that was shipped from
> Bandwidth.com and I'm able to receive incoming calls but cannot get to
> extensions.
>
> What I setup was:
>
>
>    - Un-managed Trunk pointing to the the EdgeMarc's IP
>    - Un-managed Gateway pointing to the Edgemarc's IP
>    - In the EdgeMarc I pointed traffic via ALG to Sipx IP
>    - In EdgeMarc I created a default dialin/dialout rule
>    - I selected the EdgeMarc as my SBC In Internet Dialing
>    - I put on patch17
>    - I did try it with Sipxbridge first, but I get the same results so now
>    i'm just doing an Un-managed SBC (I can connect to the PBX with both
>    configuration except I can't get to other extensions)
>
>
> Finally i'm all out of Ideas. please see current setup below:
>
>
> EDGEMarc (x.x.x.x) WAN IP  In the Edgemarc I told it where to look for PBX
> (works OK with AA)
>      |
>      |
>   Switch
>      |
>      |
>  Sipx/Phones going into switch (192.168.1.0/24) network
>
>
> What can i be missing???
>
> Thanks in advance.
>
> JP
>
> _______________________________________________
> sipx-users mailing list [email protected]
> List Archive: http://list.sipfoundry.org/archive/sipx-users
> Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
> sipXecs IP PBX -- http://www.sipfoundry.org/
>



-- 
M. Ranganathan
_______________________________________________
sipx-users mailing list [email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/

Reply via email to