Not hard, very reliable.
Sample config attached. Enjoy!
On Wed, Nov 4, 2009 at 1:59 PM, Kgee Gee <[email protected]> wrote:
> Anyone have any expierance with Patton SN4960/1E24V/UI gateway and sipx?
> Had too many issues with power supply faluires with AudioCodes MK1 and want
> an alternative. Is it hard to configure it with sipx?
>
> _______________________________________________
> sipx-users mailing list [email protected]
> List Archive: http://list.sipfoundry.org/archive/sipx-users
> Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
> sipXecs IP PBX -- http://www.sipfoundry.org/
>
--
======================
Tony Graziano, Manager
Telephone: 434.984.8430
Fax: 434.984.8431
Email: [email protected]
LAN/Telephony/Security and Control Systems Helpdesk:
Telephone: 434.984.8426
Fax: 434.984.8427
Helpdesk Contract Customers:
http://www.myitdepartment.net/gethelp/
#----------------------------------------------------------------#
# #
# SN4960/4E24V #
# R4.2 2008-09-11 H323 RBS SIP #
# 2009-10-26T08:07:23 #
# SN/00A0BA04397D #
# Generated configuration file #
# #
#----------------------------------------------------------------#
cli version 3.20
administrator administrator password QKrWI4vUYij2DsOEIpjpWg== encrypted
clock local offset -05:00
dns-client server 172.16.248.10
dns-relay
webserver port 80 language en
sntp-client
sntp-client server primary 172.16.248.10 port 123 version 4
sntp-client server secondary 192.5.41.40 port 123 version 4
sntp-client poll-interval 36000
sntp-client local-clock-offset
system hostname telco1.mydomain.com
system
ic voice 0
pcm law-select uLaw
system
clock-source 1 e1t1 0 0
profile napt NAPT_WAN
profile napt NAPT
profile ppp default
profile call-progress-tone US_Dialtone
profile call-progress-tone US_Alertingtone
play 1 2000 440 -19 480 -19
pause 2 4000
profile call-progress-tone US_Busytone
play 1 500 480 -24 620 -24
pause 2 500
profile tone-set default
profile tone-set US
map call-progress-tone dial-tone US_Dialtone
map call-progress-tone ringback-tone US_Alertingtone
map call-progress-tone busy-tone US_Busytone
map call-progress-tone release-tone US_Busytone
map call-progress-tone congestion-tone US_Busytone
profile voip default
codec 1 g711alaw64k rx-length 20 tx-length 20
codec 2 g711ulaw64k rx-length 20 tx-length 20
profile pstn default
profile sip default
profile aaa default
method 1 local
method 2 none
context ip router
interface WAN
ipaddress dhcp
use profile napt NAPT_WAN
tcp adjust-mss rx mtu
tcp adjust-mss tx mtu
interface LAN
ipaddress 172.16.248.1 255.255.252.0
tcp adjust-mss rx mtu
tcp adjust-mss tx mtu
context ip router
route 0.0.0.0 0.0.0.0 WAN 0
route 0.0.0.0 0.0.0.0 172.16.248.2 0
context cs switch
digit-collection timeout 4
routing-table called-e164 TAB_OUT
route .%T dest-interface IF-SIP1
routing-table called-e164 TAB_IN
route default dest-service OUTBOUND
mapping-table called-e164 to called-e164 STIP-ALL
map default to ""
interface isdn IF_PRI_1
route call dest-table TAB_OUT
use profile tone-set US
caller-name send-information-following
user-side-ringback-tone
interface sip IF-SIP1
bind gateway GW-SIP
service default
route call dest-table TAB_IN
remote pbx.mydomain.com
no address-translation incoming-call calling-uri
service hunt-group OUTBOUND
drop-cause normal-unspecified
drop-cause no-circuit-channel-available
drop-cause network-out-of-order
drop-cause temporary-failure
drop-cause switching-equipment-congestion
drop-cause access-info-discarded
drop-cause circuit-channel-not-available
drop-cause resources-unavailable
route call 1 dest-interface IF_PRI_1
context cs switch
no shutdown
gateway sip GW-SIP
bind interface LAN router
service default
registration manual mydomain.com
gateway sip GW-SIP
no shutdown
port ethernet 0 0
medium auto
encapsulation ip
bind interface WAN router
shutdown
port ethernet 0 1
medium auto
encapsulation ip
bind interface LAN router
no shutdown
port e1t1 0 0
port-type t1
clock slave
linecode b8zs
framing esf
encapsulation q921
q921
permanent-layer2
uni-side user
encapsulation q931
q931
protocol ni2
uni-side user
bchan-number-order ascending-cyclic
encapsulation cc-isdn
bind interface IF_PRI_1 switch
port e1t1 0 0
no shutdown
port e1t1 0 1
port-type e1
clock master
framing crc4
shutdown
port e1t1 0 2
port-type e1
clock master
framing crc4
shutdown
port e1t1 0 3
port-type e1
clock master
framing crc4
shutdown
_______________________________________________
sipx-users mailing list [email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/
