According to a guide, the following is used to reset this device. 1. Disconnect the gateway from the power and network cables.
2. Reconnect the power cable; the gateway is powered up. After approximately 45 seconds, the ACT LED blinks for about 4 seconds. 3. While the ACT LED is blinking, press on the Reset button; the gateway resets a second time and is restored with factory default parameters. However, I don't want to lose any of the licensing so can someone confirm that this would only reset the IP and Password. _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
