I think it might just be a subnet issue. I'm using a /16 mask on 192.168.0.0 network because I recently installed multiple layer 2 switches to move things across as many VLANs. I've not completed the wiring (physically connecting servers to their respective switches) so for now, everything is on /16. Once the wiring is done, which was supposed to be this weekend, proper masks will be implemented along with routing on the juniper firewalls.
This application is on it's own 192.168.10.x network, I should have included some IP info; WAN Router | Switch | Eth1-Public IP x.x.x.x PfSense Eth0-LAN IP (192.168.10.5) (DHCP; 192.168.10.100-254) | Switch | SipX 4.0.2 (192.168.10.80) I've only edited your xml file, changing for my IPs but have not added or removed anything other than the package. _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
