Did I miss something... on the line attached to the phone cant you just set the ring type to 0?
From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Friday, January 22, 2010 11:45 AM To: Eric Varsanyi Cc: [email protected] Subject: Re: [sipx-users] Disable ringing on one Polycom phone Thanks. I just finished doing that as well. We have all also noticed the click between cycles on our custom ringtones. We haven't experienced clicking at each ring. I was able to get it up to 30 seconds and keep it under the size limits so the clicking should be held to1 at most. I set it to this file for the ringtone, and that did stick through pushing out a profile. I'm ok with having to redo it if I do a firmware upgrade. On 1/22/2010 10:34 AM, Eric Varsanyi wrote: I tried to make a 'blank' ringtone for a polycom 650 for a similar reason (two phones in the same room). I used Audacity and the appropriate parameters to export the silence. The only problem is (despite trying several DC offsets) the phone 'clicks' when it rings and clicks between each ring cycle. I made the silence long which helped but the click was still a little annoying. -Eric On Jan 22, 2010, at 10:20 AM, [email protected] wrote: Thanks. So nothing with ringing there. Any way to do it with ringtones? Maybe a way to force a blank ringtone to it? On 1/22/2010 10:11 AM, Tony Graziano wrote: The only settable volume between reboots is in the device voice/codecs area. Volume Persistence The user's selection of the receive volume during a call can be remembered between calls. This can be configured per termination (handset, headset and handsfree/chassis). In some countries regulations exist which dictate that receive volume should be reset to nominal at the start of each call on handset and headset. persist.handset [ ] (Default: unchecked) If checked, the receive volume will be remembered between calls. If set to 0, the receive volume will be reset to nominal at the start of each call. persist.headset [ ] (Default: unchecked) If checked, the receive volume will be remembered between calls. If set to 0, the receive volume will be reset to nominal at the start of each call. persist.handsfree [X] (Default: checked) If checked, the receive volume will be remembered between calls. If set to 0, the receive volume will be reset to nominal at the start of each call. It is settable by group. On Fri, Jan 22, 2010 at 10:52 AM, [email protected] <[email protected]> wrote: Is there an easy way to make a single phone not ring, and have it stick through the profile being pushed out? this is on a Polycom 550. My CEO has a second phone on his conference table. He likes to have only his desk phone ring, but be able to answer the call on either phone. No problem, I just assigned his line to both phones and turned down the ringer with the volume button on the conference table phone. That setting doesn't stick when you re-push a profile out. Is there any way to set that at the sipx level for that phone so it would stick? Thanks as always, Matthew Sipx 4.0.4, sixbridge, Verizon VOIP, No firewall (not needed, private connection), Polycom 450s and 550s - bootrom 4.2.1, firmware 3.1.3C split. _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/ -- ====================== Tony Graziano, Manager Telephone: 434.984.8430 Fax: 434.984.8431 Email: [email protected] LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 Fax: 434.984.8427 Helpdesk Contract Customers: http://www.myitdepartment.net/gethelp/ Why do mathematicians always confuse Halloween and Christmas? Because 31 Oct = 25 Dec. _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
