Some of the remotes have firewall setups to allow only 10000-20000 so figured I'd make the range 10000-31000. I suppose that so long as things are getting out via initiation on their router, that this should take care of it.
Thanks. On Mon, 25 Jan 2010 05:29:13 -0500, Picher, Michael wrote: > You shouldn't need to change the ports because you didn't have to set > > them on the remotes. > > The RTP port is negotiated as part of call setup. They will now have > 30000-31000. > > Mike > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of > [email protected] > Sent: Saturday, January 23, 2010 3:51 PM > To: sipx-users > Subject: [sipx-users] RTP Ports > > I've taken my SBCs down for testing and all of my remotes have > 10001-20000 for port ranges. Rather than change those, much easier to > change sipx. However, changing the ports to the above stops a couple of > services which seem to require the default range. > > > How can I change these ports so that I don't break anything? > > Mike > > _______________________________________________ > sipx-users mailing list [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > sipXecs IP PBX -- http://www.sipfoundry.org/
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
