These devices generate ring voltage and pretend to be an FXS. I thought that sending ring voltage TO an FXS port would at best do nothing and at worst blow it up (though unlikely unless both were glaring ring voltage at each other).
These doorphones do not look for dialtone then dial out, they pretend to be a CO trunk line so they look like an inbound call to your PBX (they provide ring voltage and talk battery): http://www.vikingelectronics.com/products/view_product.php?pid=268 (W1000A). I'll try the (now obvious) method of just routing to a table instead of an interface then attaching the map to the table. Thanks! -Eric On Jan 25, 2010, at 6:27 PM, Jim Canfield wrote: > On Mon, Jan 25, 2010 at 2:31 PM, Eric Varsanyi <[email protected]> wrote: >> Thank you very much for the response. >> >> I would think I could have a different route table for each IF_FXO interface >> that uses a different mapping table, the devil (for me) is that the example >> config doesn't have any route table at all for IF_FXO calls, the FXO >> interface just points right at the SIP interface -- so I'm not sure how to >> attach the route. > > Just point IF_FXO to the table. > > interface fxo IF_FXO0 > > route call dest-table YOUR_TABLE > disconnect-signal loop-break > disconnect-signal busy-tone > ring-number on-caller-id > dial-after timeout 2 > mute-dialing > use profile tone-set US > > ..there is no rule that says you have to direct to an interface. > >> >> Now that I know I'm on the right track at least I'll study the docs some >> more (and probably ping Patton) and let you and the list know what I come up >> with. >> > > After thinking about this, it sounds like you have several in-house > devices like 'Lobby' or 'Dock' It would be much cleaner if you used > FXS ports and have them register as sip users rather than try and > remap FXO ports. _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
