On Thu, 2010-01-28 at 20:16 +0100, Grzegorz Stanislawski wrote: > Hi. > I'm trying do deploy sipX in a enviroment of several branches > connected using layer 3 vpns on mpls. problem is that branches cannot > talk to each other as there are no paths defined and there is no routing > beetween those networks. This setup was fine for asterisk which has been > running there for several years. > What i want is to force rtp traffic to go via central site (to sipx) > for several (all would be fine too if this is only option) phones. > There is no nat and i'm not allowed to deploy nat and put phones > behind it. Most of phones have addresses which are considered public > (not RFC1918) and they are hidden from internet using firewalls. > > What can i do?
I don't think that I understand what you want. If you have vpns set up so that IP can flow between the sites, and your IP routing is set correctly, then media should go end-to-end just fine. Do you mean that you have branches A, B, and C and central site Z, and you have IP connectivity between A-Z, B-Z, and C-Z, but not A-B, A-C, and B-C? If so, why not just fix that? _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
