Under permissions, does this caller have permission for this dial plan - local dialing?
You have indicated 8 digits for the resulting number. So are you really dialing 00603xxx for your call, or is it 00603 xxxxxxxx I'd confirm this section of our dial plan. To troubleshoot this, clear your logs under /var/log/sipxpbx and then create a call. Run /var/log/sipxpbx/merge-all to create a merged.xml file. Open that file with sipviewer and see what the sip trace looks like. You can also do a packet capture on the port the phone is on, and run the VOIP option on the pcap to get the results of the dialogue. I suspect you will see an error code that will help understand what it is doing, as well as who is giving the error. From: [email protected] [mailto:[email protected]] On Behalf Of Winson (Elabram) Sent: Friday, January 29, 2010 7:51 PM To: sipXecs users Subject: [sipx-users] may i know how to configure this pennyTel to my new sip gateway? I looking for some sip trunk provider just purely make outbound call, Because for inbound we already have our PSTN E1 PRI line to do the receive call. So i check for this pennyTel actually is cheap and near by our place (i ping just 150++ms) 1) i register one account from PennyTel, 2) create one new sip gateway on my SipXecs is under sipbridge-1 3) set the ITSP (username & password) 4) create the new dial plan for my local call. (on my dialplan just enable the voicemail Ext 101 / AutoAttendant Ext 100 / and my local call ) But However , i still cannot call out, but i try use my X-lite direct connect to this sip.pennyTel.com is ok
<<image001.jpg>>
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
