>
> The media path drops after 30 seconds because the call "probably" never
> acknowledges correctly back to the provider so it is disconnected. Your
> firewall needs to have any ALG turned off and static port NAT turned on.
In this test there is no provider, I'm outside the firewall on my MAC and
register my normal office extension in 'Telephone' (a mac soft phone based on
pjsua/pjsip) then call '0'. I get the AA and can interact with her via RFC 2833
style inband DTMF (so the RTSP path is open/working both ways to the machine
running sipXecs) for about 30-45 seconds and then 'Telephone' reports a
timeout. If I transfer to a Polycom extension I get no talk path and a timeout.
This is almost certainly because I haven't done the 'remote worker' setup, I
was about to try that then recalled seeing warnings against enabling the nat
traversal settings on the list a while back.
I'll try combining the two setup guides from the old wiki and see if I can make
something that works both ways -- and report back.
Thanks for the help,
-Eric Varsanyi
_______________________________________________
sipx-users mailing list [email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/
