http://www-europe.cisco.com/en/US/products/ps10024/products_qanda_item09186a0080a359cc.shtml
-Eric On Feb 18, 2010, at 6:35 PM, warner steven wrote: > > Do you possibly have a pointer to that doc? > > s > > On Feb 18, 2010, at 12:16 PM, Eric Varsanyi wrote: > >> I had echo issues with the defaults but tweaking the gain settings per a FAQ >> on Linksys's site fixed them and the audio quality was acceptable (the >> analog POTS lines I've connected to aren't themselves all that great so this >> isn't saying too much). >> >> On these same lines an Audiocodes 4x4 sounded about the same to me after >> tweaking (using a Polycom 650 to make/receive calls). The Patton I have now >> in this role sounds about the same too, I guess I'm not an audiophile :) >> >> -Eric Varsanyi >> >> On Feb 18, 2010, at 12:35 PM, warner steven wrote: >> >>> >>> I have gotten the SPA3102 running for In and Out. I can >>> help with settings if anyone really wants it. >>> >>> But this device has horrible echo cancellation problems. >>> >>> I finally gave up and with with AudioCodes, which is has much >>> higher audio quality. >>> >>> s >>> >>>>>>> >>>>>>> >>>>> >>>>>> I'm trying to configure a spa3102 for outbound calls only. I know people >>>>>> pull their hair out over these devices, but I wanted to give it a shot. >>>>>> My only gateways I've worked with so far are sipxbridge and an >>>>>> audiocodes configred from within sipx, so I haven't really done too much >>>>>> manual FXO configuration. >>>>>> I think I may be missing something on the sipx end, because I don't >>>>>> think the call is ever making it to the spa3102. This is a new setup and >>>>>> has no other gateways. I added the spa3102 as an unmanaged gateway. I >>>>>> enabled all the dialing plans and added the gateway. I'm using a polycom >>>>>> 550, Sipx 4.0.4, bootrom 4.2.1, firmware 3.1.3C split. I would show a >>>>>> siptrace, but the merged file doesn't really have anything in it. The >>>>>> sipx server is at 10.81.1.5. The spa3102 is at 10.81.1.6. I tried >>>>>> setting the gateway in sipx to UDP manually (that is what the spa3102 >>>>>> defaults to) and specifying port 5060, but that didn't seem to change >>>>>> anything. There are only 2 logs created, so I attached those. Is there >>>>>> something simple I'm missing? I read through this, >>>>>> http://sipx-wiki.calivia.com/index.php/HowTo_configure_sipX_to_work_with_FXO/FXS_SIP_Gateways >>>>>> but I don't see anything that sticks out at me. The only thig I thought >>>>>> I might need to do is something in authrules.xml, but I'm still not >>> sure since the text around it refers to FXS and this is FXO. I sort of >>> guess there has to be some some sort of authorization for the spa3102 to >>> know the sipx call can be sent outbound, but I don't know where to do this. >>> Sorry if I'm missing something obvious here. I think the fact that I got an >>> audiocodes 8 port working inbound and outbound with no questions (and >>> clearly not much knowledge on the subject) is a testament to how well sipx >>> is able to configure it! >>> >>> _______________________________________________ >>> sipx-users mailing list [email protected] >>> List Archive: http://list.sipfoundry.org/archive/sipx-users >>> Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users >>> sipXecs IP PBX -- http://www.sipfoundry.org/ >> > _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
