I would upgrade to the newer version of scs... this will bring you up to 4.0.4.
Mike -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Heros Deidda Sent: Tuesday, March 09, 2010 5:30 AM To: [email protected] Subject: [sipx-users] sipxbridge does not send authorization I have a SIPX 4.0.1-015823 (SCS 3.0) and I tried to setup a SIP trunk towards Eutelia. This is not the first SIP trunk I setup with SIPXBridge and Eutelia so I expected an easy job but.. the trunk doesnt register. Looking at the capture pcap file I see this: 24 172.16.172.2 83.211.227.21 SIP Request: REGISTER sip:voip.eutelia.it 24 83.211.227.21 172.16.172.2 SIP Status: 401 Unauthorized 28 172.16.172.2 83.211.227.21 SIP Request: REGISTER sip:voip.eutelia.it 28 83.211.227.21 172.16.172.2 SIP Status: 401 Unauthorized (0 bindings) Note that after the unauthorized there are 4 seconds before the new request. Inside the third SIP packet I see always REGISTER CSEQ 1 and not CSEQ 2 as I would expect It seems as if SIPXBridge dont listen the Unauthorized Any help would be appreciated Thank you, Heros _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/ _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
