Hi, thanks for advice, problem was in domain / target mismatch.
Detailed description of per-user CallerID funcionality is in http://sipxecs.sipfoundry.org/rep/sipXecs/branches/4.0/sipXproxy/lib/authplugins/CallerAlias.h. Regards, Pavel Arnost -------------------------------------------------- From: "Scott Lawrence" <[email protected]> Sent: Thursday, March 04, 2010 9:57 PM To: "PavelArnošt" <[email protected]> Cc: <[email protected]> Subject: Re: [sipx-users] Outgoing per-user Caller-ID is not respected > On Thu, 2010-03-04 at 21:27 +0100, Pavel Arnošt wrote: >> >> From header is from "bridge = ITSP" dialog. > > I (who am not quite expert) think that configuration looks ok. > > To debug this, you'll need to trace the message flow and see > what's going wrong. See: > > http://wiki.sipfoundry.org/display/xecsuserV4r0/Display+SIP+message+flow+using+Sipviewer > > when you get the trace data, post the trace with a description of your > configuration (identify components by IP address) and > which call in the trace you're talking about (by call-id or > frame number in the trace, preferably). > > > _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
