I confirm the problem was the firewall. For some reasons it rewrites the "via"
field in the wrong way. Be careful to ALG.
Problem solved. Thank you guys!
Heros
----- Messaggio originale -----
Da: "Heros Deidda" <[email protected]>
A: [email protected]
Inviato: Mercoledì, 17 marzo 2010 13:21:38 GMT +01:00
Amsterdam/Berlino/Berna/Roma/Stoccolma/Vienna
Oggetto: [sipx-users] sipxbridge does not send authorization
Thank you Michael for your suggestion. I did it but that was not the problem.
I discovered the problem is probably related to the firewall. When I get
unauthorized from
Eutelia, I can see in the via field this:
Via: SIP/2.0/UDP
172.16.172.2:5080:5080;branch=z9hG4bK9fcf98f381f708cd921a8bc04cc88761;rport=10342
172.16.172.2:5080:5080 is quite ugly and I suspect the firewall do that. I'll
try changing that and provide feedback
Heros
Ing. Heros Deidda
Pre-sales VoIP Engineer
----- Messaggio originale -----
Da: "Michael Picher" <[email protected]>
A: "Heros Deidda" <[email protected]>, [email protected]
Inviato: Martedì, 9 marzo 2010 13:12:52 GMT +01:00
Amsterdam/Berlino/Berna/Roma/Stoccolma/Vienna
Oggetto: RE: [sipx-users] sipxbridge does not send authorization
I would upgrade to the newer version of scs... this will bring you up
to 4.0.4.
Mike
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Heros
Deidda
Sent: Tuesday, March 09, 2010 5:30 AM
To: [email protected]
Subject: [sipx-users] sipxbridge does not send authorization
I have a SIPX 4.0.1-015823 (SCS 3.0) and I tried to setup a SIP trunk
towards Eutelia.
This is not the first SIP trunk I setup with SIPXBridge and Eutelia so I
expected an easy job but.. the trunk doesnt register.
Looking at the capture pcap file I see this:
24 172.16.172.2 83.211.227.21 SIP Request: REGISTER
sip:voip.eutelia.it
24 83.211.227.21 172.16.172.2 SIP Status: 401 Unauthorized
28 172.16.172.2 83.211.227.21 SIP Request: REGISTER
sip:voip.eutelia.it
28 83.211.227.21 172.16.172.2 SIP Status: 401 Unauthorized
(0 bindings)
Note that after the unauthorized there are 4 seconds before the new
request. Inside the third SIP packet I see
always REGISTER CSEQ 1 and not CSEQ 2 as I would expect
It seems as if SIPXBridge dont listen the Unauthorized
Any help would be appreciated
Thank you,
Heros
_______________________________________________
sipx-users mailing list [email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/
_______________________________________________
sipx-users mailing list [email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/
