You'll probably need to move to 5.4 firmware, make sure that DNS stuff is set right.
Gateway defs are also a little different. There are examples in the Wiki. Mike > -----Original Message----- > From: [email protected] [mailto:sipx-users- > [email protected]] On Behalf Of Massimo VIGNONE > Sent: Sunday, March 21, 2010 6:08 PM > To: [email protected] > Subject: [sipx-users] Too many hops > > Hi, > > I'm moving from a 3.8 based large installation to a 4.0.4 sipxecs based > pbx. > > I have several patton smartnode gateways. > > All of them worked correctly with the 3.8 release. > > All of them are configured using the following example: > > ... > gateway sip GW-MYDOMAIN > bind interface LAN router > > service default > domain mydomain.net > defaultserver manual mydomain.net loose-router > registration manual mydomain.net use-default-server > ... > > The command "defaultserver" tells the device to append the following > field > to all SIP request headers > > ... > Route: <sip:mydomain.net;lr> > ... > > This cause that all SIP requests generated by the gateway are forwarded > from the proxy to itself, causing a "Too many hops" error. > > I've removed the "defaultserver" command on the patton smartnode, so I > fixed the problem. > > So my question is: is this behaviour correct? and, if so, why > everything > was working with the 3.8 release? > > TIA, > > Massimo > > > > > > > > _______________________________________________ > sipx-users mailing list [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > sipXecs IP PBX -- http://www.sipfoundry.org/ _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
