It could also be the call supervision on the analog line and the gateway taking a while to notice that the analog line is hung up.
From: [email protected] [mailto:[email protected]] On Behalf Of Tony Graziano Sent: Wednesday, April 07, 2010 1:29 AM To: Rhon Cc: [email protected] Subject: Re: [sipx-users] Dial Tone delayed after when phone is hanged sounds like a dialplan ont he phone. On Wed, Apr 7, 2010 at 1:11 AM, Rhon <[email protected]> wrote: Hi, We noticed after calling or receiving a call there was at least more that 10secs of delay before getting a new dial tone? We already put down the handset, however the phone is still busy whenever a call is established again on the same phone no. Is there a way to adjust this? We are using Cisco as Gateway + FXO, SipXecs 4.1.7. Calls were made from/to a pstn number. Thanks in advance. - Rhon _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/ -- ====================== Tony Graziano, Manager Telephone: 434.984.8430 Fax: 434.984.8431 Email: [email protected] LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 Fax: 434.984.8427 Helpdesk Contract Customers: http://www.myitdepartment.net/gethelp/ Why do mathematicians always confuse Halloween and Christmas? Because 31 Oct = 25 Dec.
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
