Out of curiosity, can you make sure the file was not altered (rights, the AC ini file in the tftproot). It should be user/group sipxchange/sipxchange with rights of 644 (rw-r--r--).
On Wed, Apr 7, 2010 at 3:09 PM, Tony Graziano <[email protected]> wrote: > guessing you are running sipx 4.0.x. if so, it certainly sounds like > an audiocodes issue. > > It's not what you want, but you can click the ini link in sipxconfig, > download it and load it manually from the web interface in the AC. > > I normally use Patton, so I don't know besides submitting the file in > the AC and "brning" the config what else needs to be done in order to > make it functional. > > This is probably not the type of solution you are looking for because > changes are not "automated'. Guessing you have a service contract with > your vendor and maybe they can help? > > On Wed, Apr 7, 2010 at 3:01 PM, Johan Reinalda > <[email protected]> wrote: >> Tony, >> >> Yes, tftp server is fine, we have 6 polycom phones "hanging off" this test >> system as well. They work fine... >> >> What we don't see are tftp packets from the M1K to the tftp server... >> >> Johan >> >> >> On 4/7/2010 11:45 AM, Tony Graziano wrote: >> >> and you are sure sipxconfig-tftp is installed? tftpd service is running on >> sipxecs? >> >> On Wed, Apr 7, 2010 at 2:38 PM, Johan Reinalda >> <[email protected]> wrote: >>> >>> We have done that, and see the <mac-address>.ini file in /var/.... >>> >>> However, we don't ever see the TFTP request at the packet level coming out >>> the unit ???? >>> (ie. the M1K is not initiating tftp after boot up...) >>> >>> Johan >>> >>> >>> >>> >>> On 4/7/2010 11:21 AM, Tony Graziano wrote: >>>> >>>> You need to ensure you've got the profile in the tftp server that it is >>>> asking for. Once, a long,long time ago... in a far off distant version of >>>> sipxpbx... I created phones and never "sent" the profiles which created >>>> the >>>> config files for the phones to pickup. So if you have not sent the >>>> profile >>>> "to" the tftp server by sending it... You'll wait a long, long, long >>>> time. >>>> ============================ >>>> Tony Graziano, Manager >>>> Telephone: 434.984.8430 >>>> Fax: 434.984.8431 >>>> >>>> Email: [email protected] >>>> >>>> LAN/Telephony/Security and Control Systems Helpdesk: >>>> Telephone: 434.984.8426 >>>> Fax: 434.984.8427 >>>> >>>> Helpdesk Contract Customers: >>>> http://www.myitdepartment.net/gethelp/ >>>> >>>> ----- Original Message ----- >>>> From: [email protected] >>>> <[email protected]> >>>> To: [email protected]<[email protected]> >>>> Sent: Wed Apr 07 14:17:11 2010 >>>> Subject: [sipx-users] AudioCodes M1K gateway, again >>>> >>>> All, >>>> >>>> We now have our AudioCodes M1K running v5.40, which should be >>>> auto-configurable by sipX >>>> I have "erased" the config by uploading a blank ini file. >>>> >>>> The unit is still not going into tftp mode. A packet snif reveals that >>>> -bootp works, and the unit get ip address, next server, filename, >>>> options fields netmask and router. >>>> -about 30 secs later, the unit sends 8 or gratuitous ARPs for it's new >>>> ip address. >>>> >>>> That is all. At this point the web management interface is available, >>>> with default user/password >>>> However, the auto-config download via TFTP does not happen. >>>> >>>> Any suggestions as to what we may be missing here ? >>>> (Spantree issues have already been removed, as suggested earlier) >>>> >>>> Thanks, >>>> >>>> Johan >>>> >>>> _______________________________________________ >>>> sipx-users mailing list [email protected] >>>> List Archive: http://list.sipfoundry.org/archive/sipx-users >>>> Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users >>>> sipXecs IP PBX -- http://www.sipfoundry.org/ >>>> >>>> >> >> >> >> -- >> ====================== >> Tony Graziano, Manager >> Telephone: 434.984.8430 >> Fax: 434.984.8431 >> >> Email: [email protected] >> >> LAN/Telephony/Security and Control Systems Helpdesk: >> Telephone: 434.984.8426 >> Fax: 434.984.8427 >> >> Helpdesk Contract Customers: >> http://www.myitdepartment.net/gethelp/ >> >> Why do mathematicians always confuse Halloween and Christmas? >> Because 31 Oct = 25 Dec. >> >> >> _______________________________________________ >> sipx-users mailing list [email protected] >> List Archive: http://list.sipfoundry.org/archive/sipx-users >> Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users >> sipXecs IP PBX -- http://www.sipfoundry.org/ >> > > > > -- > ====================== > Tony Graziano, Manager > Telephone: 434.984.8430 > Fax: 434.984.8431 > > Email: [email protected] > > LAN/Telephony/Security and Control Systems Helpdesk: > Telephone: 434.984.8426 > Fax: 434.984.8427 > > Helpdesk Contract Customers: > http://www.myitdepartment.net/gethelp/ > > Why do mathematicians always confuse Halloween and Christmas? > Because 31 Oct = 25 Dec. > -- ====================== Tony Graziano, Manager Telephone: 434.984.8430 Fax: 434.984.8431 Email: [email protected] LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 Fax: 434.984.8427 Helpdesk Contract Customers: http://www.myitdepartment.net/gethelp/ Why do mathematicians always confuse Halloween and Christmas? Because 31 Oct = 25 Dec. _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
