Tried it also... wiped the config files from the machine as well before re-sending...
I've created a JIRA issue http://track.sipfoundry.org/browse/XX-8220 Thanks, Mike > -----Original Message----- > From: Tony Graziano [mailto:[email protected]] > Sent: Sunday, April 18, 2010 7:47 AM > To: Picher, Michael > Cc: [email protected] > Subject: Re: [sipx-users] Polycom 601 / with sipXecs 4.2 > > It's using a valid firmware as far as the phone is concerned. Looking > over the posts from other groups and searching with "5|00| > Compatiblity for image 0 is 0x11410." shows a lot of folks changing > the firmware version for that device. Would you consider uploading > 3.1.6 and activating it and seeing if that will get the phone to boot? > > On Sun, Apr 18, 2010 at 6:54 AM, Picher, Michael > <[email protected]> wrote: > > I'm not sure if this is the case with all x01 Polycom models but the > 601's > > are having some sort of serious error with the new 4.2 config files. > If you > > have any x01 series phones I'd hold off going to 4.2. > > > > > > > > Here's the log from a boot. I'll open an issue in the tracker. > > > > > > > > 0418105018|so |4|00|---------- Initial log entry ---------- > > > > 0418105018|so |4|00|+++ Note that bootrom log times are in GMT +++ > > > > 0418105018|wdog |4|00|Initial log entry > > > > 0418105018|cfg |4|00|Initial log entry > > > > 0418105018|copy |4|00|Initial log entry > > > > 0418105018|cdp |4|00|Initial log entry > > > > 0418105018|so |3|00|Platform: Model=SoundPoint IP 601, > > Assembly=2345-11605-001 Rev=A > > > > 0418105018|so |3|00|Platform: Board=2345-11605-001 2 > > > > 0418105018|so |3|00|Platform: MAC=0004f203c1e7, IP=Unknown, Subnet > > Mask=Unknown > > > > 0418105018|so |3|00|Platform: BootBlock=2.6.0 (11605_001) 30-Apr-05 > 12:50 > > > > 0418105018|so |3|00|Application, main: Label=BOOT, > Version=3.1.0.0269 > > 14-Jun-05 14:01 > > > > 0418105018|so |3|00|Application, main: P/N=3150-11069-310 > > > > 0418105018|app1 |4|00|Initial log entry. > > > > 0418105019|so |3|00|Link status is Net up Speed 100 full Duplex, PC > down. > > > > 0418105023|cdp |5|00|CDP is DISABLED. CDP not detected at boot. > > > > 0418105023|cdp |5|00|802.1Q/VLAN tagging is DISABLED. > > > > 0418105025|app1 |3|00|Using resolver server 172.16.1.2, alternate > server > > 172.16.1.254, and domain sipxecs.info. > > > > 0418105025|app1 |3|00|DHCP returned result 0x3EF from server > 172.16.1.2. > > > > 0418105025|app1 |3|00| Phone IP address is 172.16.1.249. > > > > 0418105025|app1 |3|00| Subnet mask is 255.255.255.0. > > > > 0418105025|app1 |3|00| Gateway address is 172.16.1.254. > > > > 0418105025|app1 |3|00| FTP server address is sipx.sipxecs.info. > > > > 0418105025|app1 |3|00| Time server is 208.53.158.34. > > > > 0418105025|app1 |3|00| GMT offset is 0 seconds. > > > > 0418105025|app1 |3|00| DNS server is 172.16.1.2. > > > > 0418105025|app1 |3|00| DNS alternate server is 172.16.1.254. > > > > 0418105025|app1 |3|00| DNS domain is sipxecs.info. > > > > 0418105025|app1 |3|00|Bootline: eim(0,0)bootHost:flash > > e=172.16.1.249:ffffff00:a8c0:4bcae3f1 h=172.16.1.2 g=172.16.1.254 > u=PlcmSpIp > > pw=**** f=0x40 tn= > > > > 0418105025|app1 |3|00|Bootline: CircaIP > > > > 0418105115|app1 |3|00|Time has been set from > 208.53.158.34(208.53.158.34). > > > > 0418105115|cfg |3|00|New load header information: > > > > 0418105115|cfg |3|00|Code length: 0x0009A300 > > > > 0418105115|cfg |3|00|Header check Sum: 0x2E6BB8A8 > > > > 0418105115|cfg |3|00|Code check Sum: 0x05221390 > > > > 0418105115|cfg |3|00|Options: 0x00000011 > > > > 0418105117|cfg |3|00|New load header information: > > > > 0418105117|cfg |3|00|Code length: 0x0009C2D0 > > > > 0418105117|cfg |3|00|Header check Sum: 0x3040FCA7 > > > > 0418105117|cfg |3|00|Code check Sum: 0x053737B3 > > > > 0418105117|cfg |3|00|Options: 0x00000011 > > > > 0418105118|cfg |3|00|New load header information: > > > > 0418105118|cfg |3|00|Code length: 0x0009E7E0 > > > > 0418105118|cfg |3|00|Header check Sum: 0x304F6873 > > > > 0418105118|cfg |3|00|Code check Sum: 0x05457E6F > > > > 0418105118|cfg |3|00|Options: 0x00000011 > > > > 0418105120|cfg |3|00|New load header information: > > > > 0418105120|cfg |3|00|Code length: 0x0009AC00 > > > > 0418105120|cfg |3|00|Header check Sum: 0x2E6FCDB7 > > > > 0418105120|cfg |3|00|Code check Sum: 0x05261F97 > > > > 0418105120|cfg |3|00|Options: 0x00000011 > > > > 0418105121|cfg |3|00|New load header information: > > > > 0418105121|cfg |3|00|Code length: 0x0009ABB0 > > > > 0418105121|cfg |3|00|Header check Sum: 0x30311EED > > > > 0418105121|cfg |3|00|Code check Sum: 0x05277119 > > > > 0418105121|cfg |3|00|Options: 0x00000011 > > > > 0418105122|cfg |3|00|New load header information: > > > > 0418105122|cfg |3|00|Code length: 0x00269799 > > > > 0418105122|cfg |3|00|Header check Sum: 0x99EC55CC > > > > 0418105122|cfg |3|00|Code check Sum: 0x13C5BC13 > > > > 0418105122|cfg |3|00|Options: 0x00000011 > > > > 0418105127|cfg |3|00|New load header information: > > > > 0418105127|cfg |3|00|Code length: 0x001A365F > > > > 0418105127|cfg |3|00|Header check Sum: 0x934127DB > > > > 0418105127|cfg |3|00|Code check Sum: 0x0D26EF58 > > > > 0418105127|cfg |3|00|Options: 0x00000011 > > > > 0418105130|cfg |3|00|New load header information: > > > > 0418105130|cfg |3|00|Code length: 0x002FC343 > > > > 0418105130|cfg |3|00|Header check Sum: 0x16A318FD > > > > 0418105130|cfg |3|00|Code check Sum: 0x16735362 > > > > 0418105130|cfg |3|00|Options: 0x00000010 > > > > 0418105131|cfg |5|00|Error: file does not contain a compatible > image. > > > > 0418105131|cfg |5|00| Compatiblity for image 0 is 0x11410. > > > > 0418105131|cfg |5|00| Compatiblity for image 1 is 0x11415. > > > > 0418105131|cfg |5|00| Compatiblity for image 2 is 0x11410. > > > > 0418105131|cfg |5|00| Compatiblity for image 3 is 0x11410. > > > > 0418105131|cfg |5|00| Compatiblity for image 4 is 0x11415. > > > > 0418105131|cfg |5|00| Compatiblity for image 5 is 0x11415. > > > > 0418105131|cfg |5|00| Compatiblity for image 6 is 0x11415. > > > > 0418105131|cfg |5|00| Compatiblity for image 7 is 0x11415. > > > > 0418105131|cfg |4|00|Could not get all 512 bytes of the header. > > > > 0418105212|app1 |4|00|Loaded application sip.ld successfully, errors > 0x120. > > > > 0418105212|app1 |6|00|Uploading boot log, time is SUN APR 18 10:52:13 > 2010 > > > > > > > > > > > > Mike > > > > > > > > _______________________________________________ > > sipx-users mailing list [email protected] > > List Archive: http://list.sipfoundry.org/archive/sipx-users > > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > > sipXecs IP PBX -- http://www.sipfoundry.org/ > > > > > > -- > ====================== > Tony Graziano, Manager > Telephone: 434.984.8430 > Fax: 434.984.8431 > > Email: [email protected] > > LAN/Telephony/Security and Control Systems Helpdesk: > Telephone: 434.984.8426 > Fax: 434.984.8427 > > Helpdesk Contract Customers: > http://www.myitdepartment.net/gethelp/ > > Why do mathematicians always confuse Halloween and Christmas? > Because 31 Oct = 25 Dec. _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
