On Mon, 2010-04-19 at 10:42 -0400, Michael Scheidell wrote: > On 4/19/10 10:21 AM, M. Ranganathan wrote: > > > > > > If you are seeing a REFER sent out to the ITSP then it likely is a > > misconfiguration on your sipxecs. > > sipxbridge shows > > Are you sure that the signaling is > > being SENT by the ITSP to port 5080 and what does the Contact header > > of the INVITE specify? > > > then I sure don't know where to tell it to do that. > using voip.ms in 'static' mode. I remember user/password mode would > show you what port it thought you were on, and it was always 5080. > > sipxbridge shows public port blank (the default)? changing now to > 5080, just in case. > external port shows 5080 (default) > > in gateway, under config, port was 0, I put in 5080. > > did all that, restarted services, still sends refer's.
The key thing is that voip.ms needs to send the INVITE to port 5080 - you have to get them to reconfigure. _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
