Sorry just want to rephrase: "I have problem with establishing calls this way. I just prefer to call directly any extensions without going to the operator or dialing 200."
It should be: "I have don't problem with establishing calls this way. I just prefer to call directly any extensions without going to the operator or dialing 200." Thanks On Fri, Apr 23, 2010 at 8:46 PM, Rhon <[email protected]> wrote: > Hi Michael, > > Sorry for that. > > Both sites are connected via IPSEC GRE tunnel. > > To reach the remote site I dial 200 (i changed the default operator = 200), > I will then dial the extension. > I have problem with establishing calls this way. I just prefer to call > directly any extensions without going to the operator or dialing 200. > > This can be accomplished the other way around. > > Thank you again for all your support. \ > > Rhon > > > On Fri, Apr 23, 2010 at 8:37 PM, Picher, Michael <[email protected] > > wrote: > >> How are you reaching the remote AA? >> >> >> >> You really aren’t giving us much to go on. >> >> >> >> *From:* [email protected] [mailto: >> [email protected]] *On Behalf Of *Rhon >> *Sent:* Friday, April 23, 2010 8:36 AM >> *To:* Tony Graziano; [email protected] >> >> *Subject:* Re: [sipx-users] Directly Call an extension via Site-to-Site >> >> >> >> Hmn.. that's strange. I already have this options in placed but still >> can't call directly to extension without passing AA. >> >> Thank you for your patience. >> >> Rhon >> >> On Fri, Apr 23, 2010 at 6:33 PM, Tony Graziano < >> [email protected]> wrote: >> >> You dialplan needs to say, example: >> >> Prefix "3" and "2 digits, thesend the entire number >> >> On the "300-399" side, and vice versa. >> >> >> On 4/23/10, Rhon <[email protected]> wrote: >> > Hi Tony, >> > >> > That's exactly what I did. >> > >> > As said we have site-to-site running already... it's just that people >> have >> > to call the AA first become connecting to the desired extension. >> > >> > What I'm looking at is to go directly to the desired extension without >> > passing thru AA always. >> > >> > Rhon >> > >> > On Fri, Apr 23, 2010 at 6:23 PM, Tony Graziano < >> [email protected] >> >> wrote: >> > >> >> You create a dial plan of type "site to site". You create an unmanaged >> >> gateway on each system with the hostname of the other system. You >> assign >> >> your dialplan for site to site calls to that gateway. >> >> >> >> Read the wiki. >> >> ============================ >> >> Tony Graziano, Manager >> >> Telephone: 434.984.8430 >> >> Fax: 434.984.8431 >> >> >> >> Email: [email protected] >> >> >> >> LAN/Telephony/Security and Control Systems Helpdesk: >> >> Telephone: 434.984.8426 >> >> Fax: 434.984.8427 >> >> >> >> Helpdesk Contract Customers: >> >> http://www.myitdepartment.net/gethelp/ >> >> >> >> ----- Original Message ----- >> >> From: Rhon <[email protected]> >> >> To: Tony Graziano <[email protected]>; >> >> [email protected] <[email protected]> >> >> Sent: Fri Apr 23 01:06:45 2010 >> >> Subject: Re: [sipx-users] Directly Call an extension via Site-to-Site >> >> >> >> Hi Tony, >> >> >> >> Thank you for you fast reply. Site-to-Site is already running on both >> >> ends. >> >> Only that you cannot call an extension without passing the IVR. >> >> My intention is to contact an extension directly; without passing the >> AA. >> >> >> >> Rhon >> >> >> >> On Fri, Apr 23, 2010 at 11:59 AM, Tony Graziano < >> >> [email protected]> wrote: >> >> >> >> > The wiki shows you how to configure a site to site dial plan. >> >> > >> >> > You can also program speedials with the sip uri directly into your >> phone >> >> > (I.e., polycom supports it). >> >> > >> >> > Dial 2 and 2 digits, send entire number to gateway (other sipx >> server) >> >> and >> >> > vice versa. >> >> > ============================ >> >> > Tony Graziano, Manager >> >> > Telephone: 434.984.8430 >> >> > Fax: 434.984.8431 >> >> > >> >> > Email: [email protected] >> >> > >> >> > LAN/Telephony/Security and Control Systems Helpdesk: >> >> > Telephone: 434.984.8426 >> >> > Fax: 434.984.8427 >> >> > >> >> > Helpdesk Contract Customers: >> >> > http://www.myitdepartment.net/gethelp/ >> >> > >> >> > ----- Original Message ----- >> >> > From: [email protected] >> >> > <[email protected]> >> >> > To: [email protected] <[email protected]> >> >> > Sent: Thu Apr 22 23:39:55 2010 >> >> > Subject: [sipx-users] Directly Call an extension via Site-to-Site >> >> > >> >> > Hi, >> >> > >> >> > Is there a way I can configure a user to dial an extension directly >> from >> >> > our >> >> > remote office? >> >> > >> >> > Here's our ext. >> >> > >> >> > HQ = 200 - 299 >> >> > RO = 300 - 399 >> >> > >> >> > Say user 210 want to directly dial the extension 311 how can I >> >> > accomplish >> >> > this? >> >> > >> >> > I was able to use a Phantom User to direct a PSTN call to a live >> >> > operator >> >> > and was successful. Just don't know how to start with this scenario. >> >> > >> >> > Hope you can help me. >> >> > >> >> > Thanks in advance. >> >> > >> >> > Rhon >> >> > >> >> >> > >> >> -- >> Sent from my mobile device >> >> >> ====================== >> Tony Graziano, Manager >> Telephone: 434.984.8430 >> Fax: 434.984.8431 >> >> Email: [email protected] >> >> LAN/Telephony/Security and Control Systems Helpdesk: >> Telephone: 434.984.8426 >> Fax: 434.984.8427 >> >> Helpdesk Contract Customers: >> http://www.myitdepartment.net/gethelp/ >> >> Why do mathematicians always confuse Halloween and Christmas? >> Because 31 Oct = 25 Dec. >> >> >> > >
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
