> > > > 5. Which value is good to be set as Refresh time on the > > phone? I know that default hardcoded minimum time is 300. > > Does it make sence to put a lower value or a high value? > > A hardcoded minimum of 300 is not enough. Phone is expected to be able to go > lower. SipXecs will use refresh intervals as low as 180 seconds for remote > workers. The phone should go below that (90 seconds maybe) >
Does it mean that we need to set Registration Refresh time on the phone to be 300 seconds or a higher value, but in any case not a lower value than 300? In sipregistrar.log i see "423 Registration Too Brief" for this user. Is this happen because Registration Refresh Time on the phone is set to a lower value than Minimum Expiration Time on server side right now (300 seconds - the hardcoded value )? The Registration Refresh Time on the phone is set to 180 seconds right now. I tried this experiment: I set SIP_REGISTRAR_MIN_EXPIRES in registrar-config to be 150 and on the phone Registration Refresh Time was set to be 180 seconds. But my boss reported that he is loosing registration with these values. I'm confused right now what values to use for Registration Refresh time. What values do you use in your installations and phones? My point is to understand exactly what range of values i can use for Registration Refresh Time on the phone, so the result from this will be phone to not loose its registration. I will be really happy if you give me more info for this. P.S. For Outbound proxy is clear right now. _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
