That has not been my experience with 4.0.4 and Polycom running 3.1.3c. Holds and transfers work fine, no problems.
-----Original Message----- From: Lara Johnson [mailto:[email protected]] Sent: Thursday, April 29, 2010 5:14 AM To: Todd Hodgen; 'Picher, Michael'; [email protected] Subject: RE: [sipx-users] Polycom Auto Configuration I'm sorry, I'm actually running 4.2.0, I was just saying that since 3.10.2 that I've had to use that workaround to get everything working. I was hoping that I wouldn't in 4.2.0, but it's the same thing. I've tried in every sipxecs version and polycom firmware to allow auto-configuration and it has the same symptoms, failure to transfer and hold's don't work properly. -----Original Message----- From: Todd Hodgen [mailto:[email protected]] Sent: Wednesday, April 28, 2010 3:46 AM To: 'Picher, Michael'; Lara Johnson; [email protected] Subject: RE: [sipx-users] Polycom Auto Configuration I can tell you from experience that the behavior of the Polycom 450 will be significantly better once you get to sipXecs 4.0.2 and above. Your transfer issues will go away. And you won't have to custom configure the .cfg files. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Picher, Michael Sent: Wednesday, April 28, 2010 12:27 AM To: Lara Johnson; [email protected] Subject: Re: [sipx-users] Polycom Auto Configuration Lara, I'd either keep working around them or 3 step migrate to 3.10.3, 4.0.4 and then 4.2.0. You're approaching the end of the comfortable upgrade range. I'd start planning... Mike > -----Original Message----- > From: [email protected] [mailto:sipx-users- > [email protected]] On Behalf Of Lara Johnson > Sent: Tuesday, April 27, 2010 10:11 AM > To: [email protected] > Subject: [sipx-users] Polycom Auto Configuration > > I've had these problems for a while now and have worked around them, > but I'm wondering if I'm the only one having these issues. > > I have polycom soundpoint IP 450, 330, and 650's all running 3.2.2 now. > I attempted to allow SipXecs to auto configure the parameters and they > register fine, but when it comes to transfers and other functions they > fail every time. > > I discovered at version 3.10.2 that I could manually edit the default > sip.cfg file that comes with the firmware for each phone and all the > features work fine. Does anyone else have this problem? > _______________________________________________ > sipx-users mailing list [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users > sipXecs IP PBX -- http://www.sipfoundry.org/ _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/ _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
