Ly,
I don't know that this combination has been tested with sipXbridge and FaxFinder. Usually we'll bring the signal in on PRI into SmartNode 4960 gateway and then route to a Smartnode 4112/2js for fax line. Tony will pipe up if he has tested this with sipXbridge. The questions here is T.38 compatibility with your ITSP provider and also with sipXbridge. If you have a limited budget these might be waters you don't want to play in. Mike From: [email protected] [mailto:[email protected]] On Behalf Of Tran, Ly V. Sent: Tuesday, May 04, 2010 10:53 AM To: [email protected] Subject: [sipx-users] FaxFinder and SipX Help Can someone point me in the right direction on how to configure a Multitech FaxFinder with SipXecs? We currently have SipX deployed with a siptrunk and using the sipxbridge, so do not have a physical gateway or SBC. What we would like to be able to do is use the FaxFinder to route the incoming Faxes via DID to the correct persons. From what I have read, some of you guys have been able to achieve this with the use of a Patton Smartnode. My budget is quite limited, so I have several questions for those that have done this. 1. What is the minimum Patton Smartnode to purchase to achieve this. One with both FXO/FXS ports? Or just FXS ports will suffice? 2. What is the role of the Smartnode since we are already using an ITSP with siptrunk/sipxbridge? 3. Is there a simple config template for the Smartnode to fit in to this scenario? Any help for this would be appreciated. Ly (Lee) Tran
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
