Hello,
Like you see bellow, he is enable (<music-on-hold-support-enabled>true</music-on-hold-support-enabled> ) Its a new install of Sipx on a centos with the ISO image. I use an aastra phone , I have done 2 change for this phone in the config, 1 to disable the gruu , the second to force a ptime of 20 ms. I see that aastra dont support correctly music on hold for internal call , but I read that with this new version of Sipx the sipXbridge must mange MoH correctly event the phone dont support it (for call connected via a SIP trunk). To do the test, I have done a call from the aastra to mobile number via a SIP trunk, after the call is answered I start a transfer to put the call in hold. Regards Laurent <?xml version="1.0" ?> <sipxbridge-config xmlns="http://www.sipfoundry.org/sipX/schema/xml/sipxbridge-00-00";> <bridge-configuration> <global-address>192.168.11.11</global-address> <external-address>192.168.11.11</external-address> <external-port>5080</external-port> <local-address>192.168.11.11</local-address> <local-port>5090</local-port> <sipx-proxy-domain>peoplefone.local</sipx-proxy-domain> <sipx-supervisor-host>sipx.peoplefone.local</sipx-supervisor-host> <sipx-supervisor-xml-rpc-port>8092</sipx-supervisor-xml-rpc-port> <stun-server-address>stun.peoplefone.ch</stun-server-address> <sip-keepalive-seconds>20</sip-keepalive-seconds> <media-keepalive-seconds>1</media-keepalive-seconds> <xml-rpc-port>8088</xml-rpc-port> <call-limit>-1</call-limit> <music-on-hold-support-enabled>true</music-on-hold-support-enabled> <music-on-hold-address>~~mh~</music-on-hold-address> <music-on-hold-delay-miliseconds>500</music-on-hold-delay-miliseconds> <music-on-hold-supported-codecs>PCMU,PCMA,G722,L16</music-on-hold-supported- codecs> <log-level>INFO</log-level> <log-directory>/var/log/sipxpbx/</log-directory> <location-id>1</location-id> </bridge-configuration> De : Tony Graziano [mailto:[email protected]] Envoyé : mercredi 5 mai 2010 18:52 À : Laurent Cc : [email protected] Objet : Re: [sipx-users] Moh with SIP trunk You need to enable it on sipxbridge in 4.2 (advanced settings). You need to be sure the phone yo have supports it. You need to explain what you have done and what is happening in order to get some help. On Wed, May 5, 2010 at 12:48 PM, Laurent <[email protected]> wrote: Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit Organization: SipXecs Forum In-Reply-To: <[email protected]> X-FUDforum: 08063afcdd00a6e76393c5b9527381e8 <46129> Message-ID: <[email protected]> Hello, any idea ? how can I debug this ? I have checked Freeswitch and sipxbridge log and I don't see anything about MoH. Regards Laurent _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/ -- ====================== Tony Graziano, Manager Telephone: 434.984.8430 sip: [email protected] Fax: 434.984.8431 Email: [email protected] LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 sip: [email protected] Fax: 434.984.8427 Helpdesk Contract Customers: http://www.myitdepartment.net/gethelp/ Why do mathematicians always confuse Halloween and Christmas? Because 31 Oct = 25 Dec.
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
