Content-Type: text/plain;
  charset="utf-8"
Content-Transfer-Encoding: 8bit
Organization: SipXecs Forum
In-Reply-To: <[email protected]>
X-FUDforum: 08063afcdd00a6e76393c5b9527381e8 <46893>
Message-ID: <[email protected]>



A new chapter in the DTMF saga...

A number of issues have led us to look into changing ITSPs. 
 Voxitas set up a test account for us to use for 30 days to
find and resolve any issues we might have with their
service.

In testing with Voxitas, we discovered that when we call
some numbers, the AA at the receiving end sometimes cannot
decode our DTMF.

One of the numbers that exhibited the problem happened to be
an outside consultant that we use.  Working with the
consultant, we made a Wireshark capture of a call to the
consultant, and the consultant made a simultaneous capture
from their end.  In comparing the two captures, it appears
that DTMF is leaving our network correctly, but is being
corrupted before it reaches our consultant.

Voxitas says that there are known issues between Asterisk
and some audio gateways, and hypothesized that something
similar was happening here.  For a fee, they offered to
determine which of Voxitas's upstream providers corrupt our
DTMF, and lock us into the remaining upstream provider(s).

This makes us two for two on ITSPs that have had some issues
with DTMF.

Since the Wireshark captures that we did with our consultant
seem to show that our system is sending DTMF correctly, and
that it is being corrupted upstream, I have to wonder if
anyone else has run into similar issues (either with certain
ITSPs or with certain audio gateways?)


sipXecs 4.0.4
Polycom IP550 and IP650 phones, with 3.1.3.30439 firmware
and 2.8.1 bootblock

-- 
Mike Burden
Lynk Systems, Inc       
e-mail: mailto:[email protected][/email]    
Phone: 616-532-4985

_______________________________________________
sipx-users mailing list [email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/

Reply via email to