confirmed. when I forward the call back out to an ITSP gateway, if the
SBC is set to sipxbridge-1, the max-forwards are 70.
If I set the SBC to something other than sipxbridge-1, the max-forwards
is set to 1.
why? where is this? how do I change it?
I can't blame Level3 for everything :-)
On 7/27/10 9:56 AM, Michael Scheidell wrote:
I have two packet traces.
one for each different ITSP.
inbound call from ITSP1, to a local extention with 'always enabled at
the same time' to my cell.
INVITE to ITSP 1 sets Max-Forwards to 70.
INVITE to ITSP 2 sets Max-Forwards to 1. (and, thus, call does NOT go
through!!!)
gets: SIP Status: *483 Too many hops
*Only difference I can tell, is I am using sipxbridge-1 on ITSP #1
(voip.ms) and using the ITSP's SBC as my route for ITSP #2 (Level3)
so, who sets the max-forwards to 1?
______________________________________________________________________
This email has been scanned and certified safe by SpammerTrap(r).
For Information please see http://www.secnap.com/products/spammertrap/
______________________________________________________________________
_______________________________________________
Sipx-users mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users/
