I don't get it. Is your vpn client really sending an ip of 0.0.0.0? What type of phone is this?
I'm assuming the vpn is an ipsec vpn. ============================ Tony Graziano, Manager Telephone: 434.984.8430 Fax: 434.984.8431 Email: [email protected] LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 Fax: 434.984.8427 Helpdesk Contract Customers: http://www.myitdepartment.net/gethelp/ ----- Original Message ----- From: [email protected] <[email protected]> To: Discussion list for users of sipXecs software <[email protected]> Sent: Mon Oct 04 19:28:52 2010 Subject: Re: [sipx-users] Registration with IP over VPN Hi Tony, Thanks for the quick reply. Yes, have listed subnets. Ping times <30ms only 3 hops. Set log to INFO, I am getting: nSIP/2.0 401 Unauthorized\r\nFrom: \"Site1\" <sip:[email protected]>; Any Ideas, or should I crank it up to debug? Kind regards James From: Tony Graziano [mailto:[email protected]] Sent: 04 October 2010 10:59 PM To: Discussion list for users of sipXecs software Subject: Re: [sipx-users] Registration with IP over VPN you have of course ensured your intranet subnets list your vpn subnets among them? you verified you can ping/traceroute to sipx just fine? I am not familiar with Billion, but I think I understand your DNS would be set to billion on your vpn connection, so cant billion know where to send queries for your sipdomain? you should crank the logging up for sipxregistrar.log and see if the attempt is getting to sipx at all... On Mon, Oct 4, 2010 at 3:53 PM, James Black <[email protected]> wrote: Please note, I am not trying to specify the IP out of pure laziness in not setting up DNS properly. The issue is that with the way the Billion has to be setup in a multiple pppoe setup, I cannot specify a DNS server for my VPN pppoe connection. I have added the ip address of my sipx server as a domain alias. From: James Black Sent: 04 October 2010 08:48 PM To: [email protected] Subject: [sipx-users] Registration with IP over VPN Hi all, I am using Billion BiPAC 7404VGOX router that has 2 FXS ports to plug in analogue phones, that can then register to a SIP server. I have this setup connected to a VPN with no NAT's with the SIPX server at our HQ. I used to be able to register to the sip server, using its IP as the registrar address. I have the following fields available to populate: Registrar Address(or Hostname): ip of sipx Registrar Port : sipx ip Expire(seconds): 3600 User Domain/Realm: sipx ip Outbound Proxy Address: sipx ip Outbound Proxy Port: 5060 Phone Number: 4 digit extension Username: 4 digit extension Password: password Display Name: display name When I was running on sipXecs 4.04 it worked fine to use the IP of the server to register etc. Since I have started using 4.2.0-1 I am unable to register the phones. I have tried a clean install from the ISO of 4.2.1 as well. Is there a way to "bypass" the strict checking that sipx does (DNS), due to the fact that I am running in a closed VPN? Kind regards James _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/ -- ====================== Tony Graziano, Manager Telephone: 434.984.8430 sip: [email protected] Fax: 434.984.8431 Email: [email protected] LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 sip: [email protected] Fax: 434.984.8427 Helpdesk Contract Customers: http://www.myitdepartment.net/gethelp/ Why do mathematicians always confuse Halloween and Christmas? Because 31 Oct = 25 Dec. _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
