Be sure you have walked through the screens for nat traversal and made sure your sipxbridge is set for port 5080, ip address (public) is specified, etc. ============================ Tony Graziano, Manager Telephone: 434.984.8430 Fax: 434.984.8431
Email: [email protected] LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 Fax: 434.984.8427 Helpdesk Contract Customers: http://www.myitdepartment.net/gethelp/ ----- Original Message ----- From: [email protected] <[email protected]> To: Discussion list for users of sipXecs software <[email protected]> Sent: Sat Oct 09 19:12:56 2010 Subject: [sipx-users] 4.3.2 Update Hello All, I'm running into another issue after updating 4.3.0 to 4.3.2 using yum update. I fixed an issue I had yesterday thanks to Tony for the info he provided me. Todays issue is I am not able to registrar an sip trunks using the option to use built in sip trunk sbc.This also translates into them not showing in registration on the sip trunk sbc statistics page. I was wondering if anyone experienced this issue before and what they did to fix it. I did a debug snapshot on the SIP Proxy and SIP Registrar. If any of this info is needed tell what part of the snapshot to post and I will. I sure the whole snapshot is not necessary but if it is needed I will post it Thanks in advance for any help. Sip trunks were registered in 4.3.0 and also on my 4.2.1 machine on the same network. _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
