is your config set for proxy media=true? On Wed, Nov 10, 2010 at 2:54 AM, Cristi Starasciuc <[email protected]>wrote:
> Attached fs cli log with sofia debug enabled. > > > On 11/10/2010 03:39 AM, Tony Graziano wrote: > > from his ivr log > > > "2010-11-09T20:15:31.057000Z":2799:sipXivr:INFO:cciuc.ciucccc.ro:Thread-18:00000000:sipxivr:"SipXivr::run > Far end hungup." > > > On Tue, Nov 9, 2010 at 8:02 PM, Tony Graziano < > [email protected]> wrote: > >> Log shows the remote side hung up. >> >> Is this functional in the snapshot from the other day? >> >> >> On Tue, Nov 9, 2010 at 7:58 PM, Joegen Baclor <[email protected]> wrote: >> >>> Tony, I think there was a reinvite (see below). Call started as G.722 >>> and renegotiated to T.38. However it is not clear which caused the >>> hangup. Cristi, can you enable sofia logging so we could see actual SIP >>> transactions? >>> >>> ---- >>> >>> 2010-11-09 22:15:20.871511 [DEBUG] switch_ivr.c:551 >>> sofia/cciuc.ciucccc.ro/[email protected] Command Execute >>> rxfax(/tmp/fax_5827737566444469207.tiff) >>> >>> EXECUTE >>> sofia/cciuc.ciucccc.ro/[email protected](/tmp/fax_5827737566444469207.tiff) >>> >>> 2010-11-09 22:15:20.871511 [DEBUG] mod_spandsp_fax.c:1051 Raw read codec >>> activation Success L16 >>> 20000 >>> >>> 2010-11-09 22:15:20.871511 [DEBUG] switch_core_codec.c:116 >>> sofia/cciuc.ciucccc.ro/[email protected] Push codec >>> L16:10 >>> >>> 2010-11-09 22:15:20.871511 [DEBUG] mod_spandsp_fax.c:1067 Raw write codec >>> activation Success >>> L16 >>> >>> 2010-11-09 22:15:21.131529 [DEBUG] sofia_glue.c:122 >>> sofia/cciuc.ciucccc.ro/[email protected] image media >>> sdp: >>> >>> v=0 >>> >>> &am >>> p;nb sp; >>> o=FreeSWITCH 1289322328 1289322330 IN IP4 >>> 192.168.1.20 >>> >>> s=FreeSWITCH >>> >>> c=IN IP4 >>> 192.168.1.20 >>> >>> t=0 >>> 0 >>> >>> & >>> nbsp ; >>> m=image 11390 udptl >>> t38 >>> >>> &am >>> p;nb sp; >>> a=T38FaxVersion:0 >>> >>> & >>> amp; nbsp; >>> a=T38MaxBitRate:14400 >>> >>> &am >>> p;nb sp; >>> a=T38FaxFillBitRemoval >>> >>> &a >>> mp;n bsp; >>> a=T38FaxRateManagement:transferredTCF >>> >>> & >>> nbsp ; >>> a=T38FaxMaxBuffer:2000 >>> >>> &a >>> mp;n bsp; >>> a=T38FaxMaxDatagram:400 >>> >>> & >>> amp; nbsp; >>> a=T38FaxUdpEC:t38UDPRedundancy >>> >>> a=T38VendorInfo:0 0 >>> 0 >>> >>> & >>> nbsp ; >>> >>> >>> 2010-11-09 22:15:21.131529 [DEBUG] sofia.c:4318 Channel >>> sofia/cciuc.ciucccc.ro/[email protected] entering state >>> [calling][0] >>> >>> 2010-11-09 22:15:21.131529 [DEBUG] sofia.c:4318 Channel sofia/ >>> cciuc.ciucccc.ro/sip:[email protected]:15060 entering state >>> [received][100] >>> >>> 2010-11-09 22:15:21.131529 [DEBUG] sofia.c:4329 Remote >>> SDP: >>> >>> v=0 >>> >>> &am >>> p;nb sp; >>> o=FreeSWITCH 1289322328 1289322330 IN IP4 >>> 192.168.1.20 >>> >>> s=FreeSWITCH >>> >>> c=IN IP4 >>> 192.168.1.20 >>> >>> t=0 >>> 0 >>> >>> & >>> nbsp ; >>> m=image 11390 udptl >>> t38 >>> >>> &am >>> p;nb sp; >>> a=T38FaxVersion:0 >>> >>> & >>> amp; nbsp; >>> a=T38MaxBitRate:14400 >>> >>> &am >>> p;nb sp; >>> a=T38FaxFillBitRemoval >>> >>> &a >>> mp;n bsp; >>> a=T38FaxRateManagement:transferredTCF >>> >>> & >>> nbsp ; >>> a=T38FaxMaxBuffer:2000 >>> >>> &a >>> mp;n bsp; >>> a=T38FaxMaxDatagram:400 >>> >>> & >>> amp; nbsp; >>> a=T38FaxUdpEC:t38UDPRedundancy >>> >>> a=T38VendorInfo:0 0 >>> 0 >>> >>> & >>> nbsp ; >>> >>> >>> 2010-11-09 22:15:31.053265 [DEBUG] switch_channel.c:2281 ( >>> sofia/cciuc.ciucccc.ro/[email protected]) Callstate Change ACTIVE >>> -> HANGUP >>> >>> >>> On Wednesday, 10 November, 2010 04:42 AM, Tony Graziano wrote: >>> >>> i dont see a reinvite to try to negotiate t.38. >>> >>> On Tue, Nov 9, 2010 at 3:28 PM, Cristi Starasciuc <[email protected] >>> > wrote: >>> >>>> Hi, >>>> >>>> I have enabled t.38 support in sipX Freeswitch and I am using FS CLI to >>>> send a fax (using: originate >>>> sofia/cciuc.ciucccc.ro/[email protected]&txfax(/home/ciuc/stuff/lista_de_preturi.tiff)) >>>> --> 400 is the fax extension >>>> defined for 200 user. >>>> (in alias.xml i have: >>>> <item> >>>> <identity>[email protected]</identity> >>>> <contact>sip:[email protected]</contact> >>>> <relation>fax</relation> >>>> </item>) >>>> >>>> I am getting an error in FS log: >>>> >>>> 2010-11-09 22:15:31.053265 [DEBUG] mod_spandsp_fax.c:313 Fax processing >>>> not successful - result (49) The call dropped >>>> prematurely. >>>> >>>> 2010-11-09 22:15:31.053265 [DEBUG] mod_spandsp_fax.c:318 Remote station >>>> id: >>>> >>>> 2010-11-09 22:15:31.053265 [DEBUG] mod_spandsp_fax.c:319 Local station >>>> id: SpanDSP Fax >>>> Ident >>>> >>>> 2010-11-09 22:15:31.053265 [DEBUG] mod_spandsp_fax.c:320 Pages >>>> transferred: >>>> 0 >>>> >>>> 2010-11-09 22:15:31.053265 [DEBUG] mod_spandsp_fax.c:322 Total fax >>>> pages: >>>> 0 >>>> >>>> 2010-11-09 22:15:31.053265 [DEBUG] mod_spandsp_fax.c:323 Image >>>> resolution: >>>> 0x0 >>>> >>>> 2010-11-09 22:15:31.053265 [DEBUG] mod_spandsp_fax.c:324 Transfer >>>> Rate: >>>> 14400 >>>> >>>> 2010-11-09 22:15:31.053265 [DEBUG] mod_spandsp_fax.c:326 ECM >>>> status >>>> off >>>> >>>> 2010-11-09 22:15:31.053265 [DEBUG] mod_spandsp_fax.c:327 remote >>>> country: >>>> >>>> 2010-11-09 22:15:31.053265 [DEBUG] mod_spandsp_fax.c:328 remote >>>> vendor: >>>> >>>> 2010-11-09 22:15:31.053265 [DEBUG] mod_spandsp_fax.c:329 remote >>>> model: >>>> >>>> 2010-11-09 22:15:31.053265 [DEBUG] mod_spandsp_fax.c:331 >>>> ============================================================================== >>>> >>>> >>>> >>>> I am attaching IVR and freeswitch logs and my fax.conf. >>>> >>>> >>>> Anyone has any idea about this? If there's more info that I can provide, >>>> I'm happy to do it. >>>> >>>> >>>> Regards, >>>> Cristi >>>> >>>> _______________________________________________ >>>> sipx-users mailing list >>>> [email protected] >>>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>>> >>> >>> >>> >>> -- >>> ====================== >>> Tony Graziano, Manager >>> Telephone: 434.984.8430 >>> sip: [email protected] >>> Fax: 434.326.5325 >>> >>> Email: [email protected] >>> >>> LAN/Telephony/Security and Control Systems Helpdesk: >>> Telephone: 434.984.8426 >>> sip: [email protected] >>> >>> Helpdesk Contract Customers: >>> http://support.myitdepartment.net >>> >>> Linked-In Profile: http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 >>> >>> >>> _______________________________________________ >>> sipx-users mailing [email protected] >>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >>> >>> >>> >> >> >> -- >> ====================== >> Tony Graziano, Manager >> Telephone: 434.984.8430 >> sip: [email protected] >> Fax: 434.326.5325 >> >> Email: [email protected] >> >> LAN/Telephony/Security and Control Systems Helpdesk: >> Telephone: 434.984.8426 >> sip: [email protected] >> >> Helpdesk Contract Customers: >> http://support.myitdepartment.net >> >> Linked-In Profile: http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 >> >> > > > -- > ====================== > Tony Graziano, Manager > Telephone: 434.984.8430 > sip: [email protected] > Fax: 434.326.5325 > > Email: [email protected] > > LAN/Telephony/Security and Control Systems Helpdesk: > Telephone: 434.984.8426 > sip: [email protected] > > Helpdesk Contract Customers: > http://support.myitdepartment.net > > Linked-In Profile: http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 > > > _______________________________________________ > sipx-users mailing [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > > > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > -- ====================== Tony Graziano, Manager Telephone: 434.984.8430 sip: [email protected] Fax: 434.326.5325 Email: [email protected] LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 sip: [email protected] Helpdesk Contract Customers: http://support.myitdepartment.net Linked-In Profile: http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
