Ok, my yesterday problem were because of wrong usage of my fax sw. Today I successfully sent 5 fax messages with different number of pages. My fax sw on the pc reported that fax transfer was ok. In the freeswitch log I see spandsp reporting that fax is received ok. But nothing is sent via email. The snapshot is available at ftp://sipx:[email protected]/fax-ok_no-email_sipx-configuration-sipx1.lab.ns tel.ru.tar.gz
Is it known problem? Thanks and regards, Nikolay. > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of > Nikolay Kondratyev > Sent: Monday, November 15, 2010 7:36 PM > To: 'Discussion list for users of sipXecs software' > Subject: Re: [sipx-users] testing t38 fax with sipx. > > I tried several times without success. > Trace and sipxivr.log are attached. > The whole snapshot is available at > ftp://sipx:[email protected]/fax05-sipx-configuration-sipx1.la > b.nstel.ru.tar > .gz > Tomorrow will (I hope) test with hardware faxmachine. > > Rgds, > Nikolay. > > > > -----Original Message----- > > From: [email protected] > > [mailto:[email protected]] On Behalf Of Tony > > Graziano > > Sent: Monday, November 15, 2010 7:14 PM > > To: [email protected] > > Subject: Re: [sipx-users] testing t38 fax with sipx. > > > > Remember to make sure your settings are still in place > after the log > > is put in debug. If not, put them back and restart fs via sipxproc > > again, then test. > > ============================ > > Tony Graziano, Manager > > Telephone: 434.984.8430 > > Fax: 434.984.8431 > > > > Email: [email protected] > > > > LAN/Telephony/Security and Control Systems Helpdesk: > > Telephone: 434.984.8426 > > Fax: 434.984.8427 > > > > Helpdesk Contract Customers: > > http://www.myitdepartment.net/gethelp/ > > > > ----- Original Message ----- > > From: [email protected] > > <[email protected]> > > To: Discussion list for users of sipXecs software > > <[email protected]> > > Sent: Mon Nov 15 10:58:33 2010 > > Subject: Re: [sipx-users] testing t38 fax with sipx. > > > > Can you please put the IVR on debug mode and send the log over > > (sipxivr.log)? > > > > Also, run the tests several times. I got successful fax > from time to > > time (i am using either FS cli or FaxVoip an XP application). > > > > When/If you get the hardware fax machine, can you please run tests > > with and without the media proxy parameter in sipX_profile.xml? > > > > > > Thanks, > > Cristi > > > > On 11/15/2010 05:32 PM, Nikolay Kondratyev wrote: > > > Ok, now i see that fs does send t38 re-invite, and further > > signalling > > > looks to be ok. > > > But fax message has not been send. In the trace (attached) > > i see that > > > mp114 sends bye. > > > In the mp114's syslog i see that it receives 'on hook' > > event from it's > > > fxs channel. > > > Mmm... i use my pc instead of real fax machine. So possibly > > problem is > > > there.... > > > I'll try with a hardware fax machine (if i'll manage to find it). > > > Thanks and regards, > > > Nikolay. > > > > > > > > -------------------------------------------------------------- > > ---------- > > > *From:* [email protected] > > > [mailto:[email protected]] *On Behalf Of > > > *Cristi Starasciuc > > > *Sent:* Monday, November 15, 2010 5:40 PM > > > *To:* Discussion list for users of sipXecs software > > > *Subject:* Re: [sipx-users] testing t38 fax with sipx. > > > > > > Indeed, I forgot about that, thanks Tony > > > > > > The parameter is: > > > <param name="inbound-proxy-media" value="true"/> > > > > > > Please add it to > > > > > > > > {sipx_install}/etc/sipxpbx/freeswitch/conf/sip_profiles/sipX_p > > rofile.xml > > > and try again. > > > > > > C > > > > > > On 11/15/2010 04:23 PM, Tony Graziano wrote: > > >> There was a t.38 parameter that needed to go in the > sipxprofile > > >> in fs (profiles) as i recall. proxy media... > > >> > > >> On Mon, Nov 15, 2010 at 7:10 AM, Cristi Starasciuc > > >> <[email protected] <mailto:[email protected]>> wrote: > > >> > > >> The patch is in, reinvite should have taken > place, I don't > > >> know why it doesn't, I'll look into it. > > >> Meanwhile, can you please add <param name="enable-t38" > > >> value="true"/> in > > >> > > >> > > {sipx_install}/etc/sipxpbx/freeswitch/conf/autoload_configs/fa > > x.conf.xml > > >> and give it another try? > > >> > > >> Regards, > > >> Cristi > > >> > > >> > > >> On 11/15/2010 11:52 AM, Nikolay Kondratyev wrote: > > >>> Hi all, > > >>> i tried to test t38 fax with sipx/fs, ... but alas... > > >>> I installed "a snapshot version" of sipx: > > 0.0.4.3.2-62363c1 > > >>> 2010-11-07T04:02:55 build27 on a virtual machine, > > configured > > >>> fax extention 301 for a user 201. > > >>> Registered Audiocodes mp114 fxs as another user - 203. > > >>> mp114 is configured to switch to t38 using reinvite. > > >>> So the first test is to send fax from 203 to 301. > > >>> I call from 203 to 301, hear fax tone. But fax > > machines are > > >>> not connected. > > >>> In the trace (attached) one can see, that there is not > > >>> re-negotiation (re-invite) from sipx to switch > media from > > >>> audio to "image udptl t38". > > >>> I looked at > > http://track.sipfoundry.org/browse/XX-8645. And > > >>> see, if i understood correctly, that there > should exist a > > >>> patch to enable "t38 reinvite". > > >>> Is it included in the version i installed? > > >>> Should i be patient and wait a bit? > > >>> Please advise... > > >>> Thanks and regards, > > >>> Nikolay. > > >>> > > >>> > > >>> _______________________________________________ > > >>> sipx-users mailing list > > >>> [email protected] > > >>> <mailto:[email protected]> > > >>> List > > Archive:http://list.sipfoundry.org/archive/sipx-users/ > > >> > > >> > > >> _______________________________________________ > > >> sipx-users mailing list > > >> [email protected] > > >> <mailto:[email protected]> > > >> List Archive: > > http://list.sipfoundry.org/archive/sipx-users/ > > >> > > >> > > >> > > >> > > >> -- > > >> ====================== > > >> Tony Graziano, Manager > > >> Telephone: 434.984.8430 > > >> sip: [email protected] > > >> <mailto:[email protected]> > > >> Fax: 434.326.5325 > > >> > > >> Email: [email protected] > > >> <mailto:[email protected]> > > >> > > >> LAN/Telephony/Security and Control Systems Helpdesk: > > >> Telephone: 434.984.8426 > > >> sip: [email protected] > > >> <mailto:[email protected]> > > >> > > >> Helpdesk Contract Customers: > > >> http://support.myitdepartment.net > > >> > > >> Linked-In Profile: > > >> http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 > > >> > > >> > > >> _______________________________________________ > > >> sipx-users mailing list > > >> [email protected] > > >> List Archive:http://list.sipfoundry.org/archive/sipx-users/ > > > > > > > > > _______________________________________________ > > > sipx-users mailing list > > > [email protected] > > > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > > _______________________________________________ > > sipx-users mailing list > > [email protected] > > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
