Wayne,
Let’s start with the basics. How are you setting the MP114 up? I’d recommend you start by configuring it on the sipXecs system as a gateway. When you have finished configuring it within sipXecs, write the profile. Once you have written the file, open the gateway, and look in the upper right hand corner. You will find an INI file that sipXecs has created. Download that file, and then upload it to the MP114 and restart it. This should get you started on using this gateway. From: [email protected] [mailto:[email protected]] On Behalf Of Wayne A. Green Sent: Sunday, January 16, 2011 1:58 PM To: [email protected] Subject: [sipx-users] Audiocodes MP-114 FXO Assistance I am in the early stages of deploying our 1st sipx system. We are using version 4.2.1 code and audiocodes MP-114 FXO gateways. Internal calls for function fine but I am not able to route call to the PSTN via the MP-114 Gateway. I am very new to the configuration of the MP-114 and I am not certain of the desired configuration on the MP-114. The dial plan rules on the SipX server appear to be fine and the gateway is defined for each of the rules. It appears that calls are not being routed to the gateway. I have used the logging feature on the gateway but no logs are generated associated with call progression. Any assistance would be greatly appreciated. Thanks, Wayne A. Green BlackBelt Technologies C: (334)233-3482 O: (205)989-0056
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
