some hipath models has a board HG1500 than drive SIP, so you can connect with sip trunk, we connect asterisk and Hipath 3000.
Hipath has Bri or Pri ports, and you could used to connect using Qsig protocol. and if you have two gateways, you can used it. Luis El dom, 30-01-2011 a las 10:26 -0600, Jim Canfield escribió: > Never mind, I should have read the rest of the thread. :) > > On Sun, Jan 30, 2011 at 10:23 AM, Jim Canfield <[email protected]> wrote: > > On Wed, Jan 26, 2011 at 7:07 AM, Matt White <[email protected]> > > wrote: > >> I have a client that would like to connect sipx to a siemens Highpath pbx > >> at > >> a remote branch. > >> > >> Has anybody done any work to integrate these two? They have open analog > >> ports but I don't think a patton FXO can really be used to bridge the two. > >> > > > > Sure it can. Especially if you have another Patton gateway at the main > > office. > > > > By "Analog Ports", I assume mean FXS or Station ports on the PBX? > > > > Integration with a legacy system is generally done using PBX trunk > > ports or FXOs. In which case you would need a FXS gateway. > > > > --Jim > > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ -- Luis Fernando Jaramillo Cel 312 777 16 74 _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
