Tony (or should I say "Mr. T"), another perfect answer. Problem was DNS was configured differently on new machine. I thought the B/U would restore the old DNS config, but your email informed me otherwise. Re-ran setup and set DNS identical to old system then restore worked!
Thanks again for your help and tolerance! Keith On May 7, 2011 11:01 AM, "Tony Graziano" <[email protected]> wrote: >You need to send the server it's own profile after a restore. >You Should be able to tell if all of your services are running properly or not. You should also be able to observe The output of > sipxproc -state >To observe any errors. You should have used the exact same Ip address, Hostname and sip domain When building the new system before restoring. >If you are looking in the correct place for the proxy log It might be here soon and that the service isn't running. Hence, The standard suggestions above. >On May 7, 2011 10:50 AM, "Keith Laidlaw" <[email protected]> wrote: >> I have upgraded a machine from 4.2.1 to 4.4.0 then backed up. Then I >> loaded a completely new machine from 4.4.0 ISO then restored the b/u. >> Now the Gateway will register with my ITSPs but the phones won't >> register with sipX. From wireshark, I see a REGISTER message and a >> TRYING reply, but nothing more. >> >> >> >> I looked at the WIKI and am going through it without much success. I >> don't think I see a sipproxy.log at all. >> >> >> >> Any ideas for me to look at? Shouldn't a restore from a working b/u be >> good enough? >> >> >> >> Keith >> >> >>
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
