Can you run them on 5.8 or 5.6 and not mess with updating them to 6.0?
Seems like an issue needs to be opened with Audiocodes. From: [email protected] [mailto:[email protected]] On Behalf Of Tony Graziano Sent: Monday, May 16, 2011 4:44 PM To: [email protected]; Discussion list for users of sipXecs software Subject: Re: [sipx-users] Slightly OT: Bricking Audiocodes MP114 I recall a lot of chatter a while back with the larger gateways and a bad PS but what you are seeing is different. Ask me again why "I don't prefer AC gateways...". To restore MP-11x to factory default settings, take these 3 steps: 1. Disconnect the Ethernet cable from the device. 2. With a paper clip or any other similar pointed object, press and hold down the Reset button (located on the rear panel) for about six seconds; the Fail LED turns red and the device restores to factory default settings. 3. When the Fail LED turns off, reconnect the Ethernet cable to the device. On Mon, May 16, 2011 at 7:11 PM, Matthew Kitchin (usenet/public) <[email protected]> wrote: I seem to have become an expert in bricking Audiocodes MP114s. I'm not an expert with these. I deploy one per site as a backup line. That's about it. The last 5 or so, I have flashed with firmware 6.x.24.x. Sorry for the missing decimal places, I don't have the file handy. 5 or so in a row went fine. Now, I am bricking about 66% of them during the upgrade process. They take the firmware through the web interface, and then don't come back to life. The fail light comes on. On all but 1 of these so far, we have been able to bring them back to life with the Audiocodes BOOTP tool. I RMA'd the one that wouldn't. I got a new one in today, and same thing. I got it back to 5.4.x with the BOOTP method. I then tried 6.x.38.x through the gui. Dead with the fail light again. I tried different browsers, direct connection with a crossover cable, etc. Does someone know something I'm missing? I noticed the manufacture date on the one I got in today is 11/09. Could that matter? This is becomin g a pain. Thanks as always, Matthew _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/ -- ====================== Tony Graziano, Manager Telephone: 434.984.8430 sip: [email protected] Fax: 434.326.5325 Email: [email protected] LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 sip: [email protected] Helpdesk Contract Customers: http://support.myitdepartment.net Blog: http://blog.myitdepartment.net Linked-In Profile: http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 _____ No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1375 / Virus Database: 1500/3641 - Release Date: 05/16/11
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
