Hi, my environment:
SipX 4.2.1 Polycom Soundpoint IP 650 3.2.4 Rev b Bootrom 4.3.0 (bevor 3.1.3c, Bootrom 4.2.0) There are two lines on the polycom phone (112 and 526). In FW 3.2.4b I just can’t call out with the first line. It is registered and people can call 112. With 3.1.3c everthing worked fine (except some issues with headsets) There are two ways to dial: - Press the line I want to use, type in the destination number, press send. That does not work with 112 but with 526. - Just begin dialing the number. The phone tries to dial with 112 first and then switches over to 526. (112: -> Invite, <- 100 Trying, 70ms…, -> Cancel. Then 526: ->Invite, <- 100 Trying, 64ms…, <- 180 Ringing, <- 200 OK) Why does the polycom send the CANCEL after it received an Trying from SipX? Any ideas? _____________________________ Jan Fricke B.Sc. Cs. IANT- APPLIED NGN-TECHNOLOGIES Schlüsselfertige VoIP-Lösungen und mehr... Member of GROUPLINK IANT GmbH Salzdahlumer Straße 46/48 D-38302 Wolfenbüttel Fon: +49/(0)5331/ 900989-0 Fax: +49/(0)5331/ 900989-499 Mail: [email protected] Internet: www.iant.de Bankverbindung: IANT GmbH, Konto-Nr. 12 95 98 50 00, Volksbank BraWo (BLZ 269 910 66); IBAN-Nr.: DE02 2699 1066 1295 9850 00, BIC: GENODEF1WOB; Steuer-Nr.: 51/DP2013; Ust.-IdNr: DE264352710; HRB 201710, Amtsgericht Braunschweig; Geschäftsführer: Dipl.-Ing. Jan Schumacher, Prof. Dr.-Ing. Diederich Wermser Diese E-Mail kann vertrauliche und/oder rechtlich geschützte Informationen enthalten. Wenn Sie nicht der richtige Empfänger sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese E-Mail. This e-mail may contain confidential and/or privileged information. If you are not the intended recipient or have received this e-mail in error please notify the sender immediately and delete this e-mail.
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
