Hi Max,
Just so you know it can be done, I too use Linksys SPAs (SPA2102s
though, not the older PAP2T--I'm not sure how well those work) and use an ITSP
that runs Metaswitch. I also get data and phone service from the same vendor,
as you do, although this vendor (Finger Lakes Technology Group in central NY)
provisioned a second independent fiber to segregate out the phone traffic from
the data.
My particular setup does not use ITSP registration, but authenticates based on
IP address of my server. They give me an IP address for their proxy server,
which I put in the "address" field of the sipx gateway config. They are able
to send calls to me on port 5080.
If there are any specific details I can share, feel free to contact me
privately.
Jeff
On Aug 5, 2011, at 1:16 PM, Max DiOrio wrote:
> I'll gladly do that as soon as my ITSP can figure out why their metaswitch
> isn't sending calls to sipxecs when it was working fine in Asterisk.
> From: [email protected]
> [[email protected]] on behalf of Michael Picher
> [[email protected]]
> Sent: Friday, August 05, 2011 1:13 PM
> To: Discussion list for users of sipXecs software
> Subject: Re: [sipx-users] Configuration of PAP2T
>
> Thanks for volunteering to do that Max :-)
>
> On Fri, Aug 5, 2011 at 12:58 PM, Max DiOrio <[email protected]> wrote:
> I didn't see the WIKI for the PAP under the SPA3102 heading. Should this be
> broken out into its own under Linksys?
>
> Anyway, I configured it exactly as stated in the WIKI and it works perfectly
> for my use. Private line, no voicemail, no transfer, no nothing.
>
> Thanks.
> From: [email protected]
> [[email protected]] on behalf of Michael Picher
> [[email protected]]
> Sent: Friday, August 05, 2011 12:44 PM
> To: Discussion list for users of sipXecs software
> Subject: Re: [sipx-users] Configuration of PAP2T
>
> i'd start with the wiki if you haven't...
>
> have fun pulling your hair out...
>
> On Fri, Aug 5, 2011 at 12:36 PM, Max DiOrio <[email protected]> wrote:
> Hi,
>
> I'm totally lost on configuring the PAP2T with sipxecs. I have the user set
> up. I enter the user id and auth id as 6465, the user, enter the sip
> password, proxy I have tried my domain, my FQDN, and IP.
>
> It complains that it can't contact login server. Any help please?
>
> _______________________________________________
> sipx-users mailing list
> [email protected]
> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>
>
>
> --
> Michael Picher
> eZuce
> Director of Technical Services
> O.978-296-1005 X2015
> M.207-956-0262
> @mpicher <http://twitter.com/mpicher>
> www.ezuce.com
>
>
> _______________________________________________
> sipx-users mailing list
> [email protected]
> List Archive: http://list.sipfoundry.org/archive/sipx-users/
>
>
>
> --
> Michael Picher
> eZuce
> Director of Technical Services
> O.978-296-1005 X2015
> M.207-956-0262
> @mpicher <http://twitter.com/mpicher>
> www.ezuce.com
>
> _______________________________________________
> sipx-users mailing list
> [email protected]
> List Archive: http://list.sipfoundry.org/archive/sipx-users/
_______________________________________________
sipx-users mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users/
