I'm not much help here - we are linking to an old NEC (not voip aware) - so we are just routing calls via the PRI interface on the Patton.
From: [email protected] [mailto:[email protected]] On Behalf Of Tony Graziano Sent: Thursday, September 01, 2011 5:47 PM To: Discussion list for users of sipXecs software Subject: Re: [sipx-users] Transfer troubles : REFER-TO not routed/modified according to the dialplan Nate you around to field this? You did this same thing a while back and had some dialplan entries the same way, as well as some specific overrides to get everything worked out on the smartnode. ________________________________ This message and any files transmitted with it are intended only for the individual(s) or entity named. If you are not the intended individual(s) or entity named you are hereby notified that any disclosure, copying, distribution or reliance upon its contents is strictly prohibited. If you have received this in error, please notify the sender, delete the original, and destroy all copies. Email transmissions cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. Garrett County Government therefore does not accept any liability for any errors or omissions in the contents of this message, which arise as a result of email transmission. Garrett County Government, 203 South Fourth Street, Courthouse, Oakland, Maryland 21550 www.garrettcounty.org
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
