Hi Fulvio,
Which Build you seeing this issue?
I tried in latest 4.5.2 build by following scenario and its working
fine.Please let me know my scenario was right?
1.DID no assigned to AA
2.Call DID number from PSTN number
3.AA will answer and dial 200 from pstn number
4.The call will transferred to 200 and 200 will start ringing
5.From 201 user dialed *78200
6. Call is retrieved and call will disconnected from 200
7.Call will established between pstn user and 201..
Regards,
Kumaran T
On 10/18/2011 1:22 PM, Fulvio Scapin wrote:
> Hello again.
> I've been finally able to reproduce in a repeatable way the phenomenon
> I described a few weeks ago.
>
> Situation:
>
> Call from outside to the SipXECS-based IVR, dialing the internal
> extension directly through the IVR, let's say extension 31.
>
> Extension 31 (polycom soundpoint 550) rings.
>
> The operator at extension 30 (also polycom soundpoint 550) dials *7831
> to pick up the call.
> After he has dialed *7831 the user at extension 31 picks up the call
> and begins talking.
> A second or two later the user at extension 30 picks up the call as well.
>
> End result:
>
> A three-way call in which each of three parties involved can speak
> with and hear the other two.
>
>
> Am I the only one finding this peculiar?
>
> Bye,
> Fulvio Scapin
> _______________________________________________
> sipx-users mailing list
> [email protected]
> List Archive: http://list.sipfoundry.org/archive/sipx-users/
_______________________________________________
sipx-users mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users/
