You can do it with one ethernet card but you need a managed layer 2 switch and some knowledge of VLans.
Of course a security expert will tell you that vlans are not security boundaries. Mike On Wed, Nov 2, 2011 at 9:07 PM, Ewan McLean <[email protected]>wrote: > *Forages for an ethernet card*. Okay :) > > Tony Graziano > 03 November 2011 01:04 > > pfsense needs to have two different interfaces in order to do nat. > > you need two interfaces in pfsense and set your modem into bridged mode > and plug it into the interface you set as wan. > _______________________________________________ > > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > Ewan McLean > 03 November 2011 00:59 > That's what it's set up as just now basically. There's only one ethernet > card - a switch connects that port to both the modem and the rest of the > LAN. > > I've configured it before using a normal centos install but when i try to > do it on pfsense it doesn't let me set both the WAN and LAN interfaces to > be the same NIC. It says I must set a WAN interface, and seems LAN is > optional. It says stuff about VLAN but that's beyond my knowledge. > > Ewan McLean > 02 November 2011 22:18 > <http://servistech.co.uk> <http://servistech.co.uk> Anyone use a single > NIC with pfsense? My 'WAN' interface will just be the ADSL modem which is > normally a virtual/PPP interface which runs over the single ethernet card > and the LAN interface will be ethernet. However it seems to be quite tricky > to get pfsense to accept this. > > If not pfsense would something like smoothwall be a better bet? > > Cheers > > Ewan > > Ewan McLean > 02 November 2011 22:17 > Anyone use a single NIC with pfsense? My 'WAN' interface will just be the > ADSL modem which is normally a virtual/PPP interface which runs over the > single ethernet card and the LAN interface will be ethernet. However it > seems to be quite tricky to get pfsense to accept this. > > If not pfsense would something like smoothwall be a better bet? > > Cheers > > Ewan > > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > -- Michael Picher, Director of Technical Services eZuce, Inc. 300 Brickstone Square**** Suite 201**** Andover, MA. 01810 O.978-296-1005 X2015 M.207-956-0262 @mpicher <http://twitter.com/mpicher> www.ezuce.com
<<postbox-contact.jpg>>
<<postbox-contact.jpg>>
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
